Shop Now & Save 10% on Laguna Tools
October is the month to save on Laguna Power Tools at Woodcraft.
Shop & Save 10%
RIKON Benchtop Bandsaw Now $90 Off
This little beaut will fit in any shop!
Get Yours $199.99
Save $500 on Nova DVR XP Lathe
Don't miss your chance to save $500 on this "intelligent" lathe.
Now Only $1,899.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 5
Back to top
Useless Zero Stop Guide for many
Micro Jig ZeroPlay Guide Bar System
The Zero Stop is for T-slot only. No where does the description say this. The guide bars work well enough, but way overpriced. Consider making your own instead.
No, I would not recommend this to a friend
I had seen Table saw sleds for a long time and wanted one, but till I purchased a folding one which needed the right miter slots as some of these are too small I had waited.
I Saw these and they are great, The instructions are easy to understand and I did it. I now have a sled that is 24x32 and using the 5 cut method cuts within .009 which is as close as anyone needs.
If you are thinking about one wait no longer.
P.S. use 3/4" ply and get longer screws too attach the runners 1/2" is too flimsy. Also only use good Ply Hardwood or Birch Etc.
It should last a lifetime.
Images shared by
Micro Jig runnners mounted on Sled
Picture of Product
Made with Product
This product was as advertised.
Instructions not necessary as the use is self evident.
Yes, I would recommend this to a friend
Doesn't work in T-Slot
Can be adjusted to fit most mitre slots
Not for olderTable saws
The tool comes with a Zero Stop Guide which uses a "t-slot" design to slide into the wider slot at the bottom of table saw miter guide that are newer.Mine is a Dewalt contractor circa 1980, and does not have the t-track in the miter guide and after calling the company, they said it would not work with my model.
1 - 5
Back to top
©2014 by Woodcraft Supply LLC