Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 6
Back to top
Tru-Stone Pen Blank - Red with Gold Matrix
Uniquely different and elegant, work it slow.
Yes, I would recommend this to a friend
Images shared by
Very elegant, great variety, good price
Can only say good things about it so im a big fan
Prone to drilling blow-out?
I tried a malachite stone blank, and both halves blew apart while drilling. Used a penblank vise and new woodriver drill, with the end supported with scrap wood. Drilled in 1/4" stages, clearing chips. Both halves blew apart in the last 1/2" Most of the fractures were along color lines. Talked to other customers who have had the same problem!
Any tips for drilling this material? Would a twist drill work better? Looks like they'd make stunning pens, but they're a bit expensive to ruin before the tubes get glued in!
No, I would not recommend this to a friend
This is a wonder to turn, it turns easily if you have very sharp tools, like all resin based or stabilized blanks you must have a dust mask, but after that, turn it down, sand it to 3200, and use some plastic polish and you will get a near mirrow quality shine
South Jordan, Utah
I teach Pen turning classes at Woodcraft and have turned many pens. I find this product a joy to work with and would recommend it to any pen turner. You won't believe the results. I sand it to 12000 grit using water and the Micromesh wet/dry pads followed by Hut Ultra Gloss Polish for a SUPER shinny finish!
1 - 6
Back to top
©2014 by Woodcraft Supply LLC