Buy Delta 8 DJ-20 Precision Jointer Model 37-365X at Woodcraft

Delta 8" DJ-20 Precision Jointer, Model 37-365X

Item #825368
Free Standard Shipping on This Product!
Residential Delivery and Lift Gate Option Charges Will Apply.
Qty.  
 
or Add to Wish List


 
 
4.0

(1 reviews)

Read 1 Reviews | Write a Review


Pin It

Product Information:

Use the Delta DJ-20 Jointer to produce a smooth, flat surface on your lumber every time!


  • Unique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered.
  • This uniform, close clearance to the cutting blade acts as a more efficient chip breaker.
  • Cabinet stand completely encases motor and pulleys to protect from dust and shavings
  • Specially-designed cast-iron fence is extra long for continued support throughout the cut.
  • Fence is center-mounted and functions as a rear guard on narrow cuts.
  • Modular cutterhead provides a consistently clean cut.
  • Jackscrew arrangement allows easy replacement and adjustment of individual knives.
  • In the event the entire cutterhead has to be removed, a new module can be fitted in place without production downtime.
  • Extra-long infeed table provides a full 76-1/2" of work support runs on sealed, lubricated-for-life ball bearings.

  • Specifications

  • Motor: 1-1/2 HP, 120/240V (Wired 240V), 60 Hz, 1 Phase TEFC, 3,450 rpm
  • Cut Capacity - Width: 8"
  • Cut Capacity - Depth: 5/8"
  • Rabbeting Capacity: 5/8"
  • Cutterhead Speed: 16,500 CPM; 5,500 RPM
  • Number of Knives: 3
  • Cutterhead Diameter: 3-3/8"
  • Table Length: 76-1/2"
  • Table Length of Front Table (Infeed): 42"
  • Table Length of Rear Table (Outfeed): 32"
  • Table Height: 32"
  • Fence Size: 5"x35"
  • Fence Tilt: In and Out 45 degrees
  • Fence Positive Stops: In and Out 90 degrees, 45 degrees
  • Dust Port Diameter: 4"
  • Length: 76.5"
  • Width: 26"
  • Height: 32"
  • Weight: 394 lbs
  • Shipping Weight: 576 lbs

  • The 37-365X includes 1-1/2 HP, 120/240V (Wired 240V), 60 Hz, Single-Phase Motor, 3-Knife Cutterhead Module, cutterhead guard with wrenches, rabbeting ledge, tilting fence, push blocks, two pulleys.





    Shipping / Billing Info:

    Shipping Information

    This product ships direct from the manufacturer:

    • Your order will ship in approximately 5 business days.
    • This product is considered special order. Your account will be charged when you place your order.
    • Express or overnight shipping is not available for this product.
    • Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.


    Return Information

    If you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details.

    When returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions.

    If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.



    Warranty Information

    DELTA is committed to making the highest quality Woodworking Power Tool & Machinery products in the industry and we want to back them with the most comprehensive warranty and Service Network in the business.


    This warranty is effective immediately on all DELTA Woodworking Power Tools & Machinery. Any product purchased on or after January 1, 2009 with a valid receipt or manufactured on or after the Date Code 200818 (week of May 1, 2008) will be covered by the new warranty, as follows.


    Five Year Limited New Product Warranty

    DELTA will repair or replace, at its expense, and its option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center or authorized service station with proof of purchase of the product within 5 years and provides DELTA with reasonable opportunity to verify the alleged defect by inspection. For all refurbished DELTA product, the warranty period is 180 days. DELTA will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made, or specifically authorized by anyone other than an authorized DELTA service facility or representative. Under no circumstances will DELTA be liable for incidental or consequential damages resulting from defective products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty is DELTA’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by DELTA.


    For further detail of warranty coverage and warranty repair information, visit http://wpa.internet.local/www.deltaportercable.com/ServiceAndSupport/Warranties.aspx.


    Woodcraft Product Experts Recommend:
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.0

    (based on 1 reviews)

    100%

    of respondents would recommend this to a friend.

    Displaying reviews 1 - 1

    Back to top

    |

     
    4.0

    WORTH THE MONEY

    By  Dick

    from Liberty Lake, WA

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy adjustments
    • Excellent safety features
    • Powerful

    Cons

    Best Uses

    • In The Workshop

    Comments about Delta 8" DJ-20 Precision Jointer, Model 37-365X :

    My previous jointer was a 6" Delta about 50 years old. Due to some large projects (the building of 14 pieces of furniture) I decided I needed longer infeed and outfeed tables, hence the purchase of the DJ-20 (and since the furniture to be built was for my wife she approved of the purchase). It was not cheap, but well worth the purchase price.

    Displaying reviews 1 - 1

    Back to top

    |