AccuRight™ Green Wood band saw blades are designed with the green wood turner in mind featuring a milled tooth, hard-edge flex back design and a slightly thicker band.
Blade size: 3/8" x 136"
Bandsaw Blade Selection Tips
Select the blade based on type of cut needed.
Thickness of material dictates TPI (Tooth Per Inch) requirements.
More TPI give a smoother but slower cut.
Fewer TPI allow a faster cut with a rougher finish.
The general rule of thumb is to use a blade with enough TPI to have at least 3 to 6 teeth in the material when cutting, but no more than 12 and no less than 3.
EX: 1” thick stock should use a 6 or 10 TPI. 3 TPI and less would give too rough a cut and could cause chipping in some woods. 14 TPI and higher would not remove sawdust adequately and thus would burn as it cuts, increasing the heat in the blade and reducing its useful life.
Type of Cut determines blade width (the tighter the radius to the curve the smaller the blade needs to be)
1/8” and below Best for tight radius scroll work (excellent choice for thin material when used with the Carter Stabilizer)
3/16” to 3/8” Cutting curves and light resaw with smaller saws (12”)
3/16” to 1/4” excellent with Carter Stabilizer.
1/2” to 1” Resaw and large contours (most 14” saws will only be able to tension a 1/2” with just the stock spring so we recommend a Carter Cobra Coil (sold separately, item #144967) to anyone with a 14” saw ordering 1/2” or larger blades)
Blade length can be determined be looking in your saws user manual or on the saw itself. Most commercially available 14” saws use 93.5” standard blades or 105” for saws with the riser block installed. Please confirm you blade size before ordering.
This product ships direct from the manufacturer:
- Your order will ship in approximately 5 business days.
- This product is considered special order. Your account will be charged when you place your order.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
If you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Returns are limited to 30 days from the date of shipment and are subject to a re-stocking charge of a minimum of 10% of the list price of the item returned.
When returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions.
If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.
Seller warrants that all goods will be free of defects in materials and workmanship and will conform to specifications furnished to Buyer. This warranty shall apply for thirty (30) days after delivery for all products except for Laser products which are warranted for a period of twelve (12) months from time of delivery. Written notice of claimed defect must be given to the Seller prior to the above warranty time frame. No warranty claim may be made for goods further processed by Buyer resulting in a change of the goods’ characteristics or dimensions. IT IS EXPRESSLY AGREED THAT THIS WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES AND LIABILITIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Seller’s express warranty shall not apply if the goods (i) have been abused or improperly used or installed. (ii) have been damaged due to negligence in transportation or handling, (iii) have had the original identification markings altered or removed, or (iv) show evidence of attempted service by anyone other than Seller’s authorized personnel.