Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
A little traditional, a little modern, this stylish queen-size bed lends a fresh look to just about any interior. Its design features the graceful curves of a classic sleigh bed, while incorporating straightforward construction. The timeless appearance of the cherry raised panels nicely complements the bright and clean lines of the solid-maple frame.
MATERIALS NOT INCLUDED; PAPER PLAN ONLY.
Shipping / Billing Info:
of respondents would recommend this to a friend.
1 - 2
Back to top
my 1st bed to easy
Powder Springs GA
Woodworking Project Paper Plan to Build Maple & Cherry Sleigh Bed
This was my 1st bed and 1st furniture progect. My father-in-law and I built the bed for my daughter.
I would suggest reading through the plan a couple of times so can do a mental dry run before you cut lumber; you know Proper preperation and all.
It would have been great if the authors put in a bit like "@ $3.50/bf for 1common cherry and maple this project will cost $400 in materials.
All in all a novice can make this bed as advertised. If you don't have alot of tools find a buddy who does.
Yes, I would recommend this to a friend
Love the look but...
I bought this plan thinking that it would be an easy build I could finish in a couple afternoons after work. There are a few major problems with these plans.
First, they give you half of the templates you need and expect you to find a copy center to make the other half. Second, they show you the techniques of how to build it, but it is poorly organized. It should start with a layout of all the pieces you are making and what the wood needs to be ripped down too. Also, it should tell you the piece you are building, show you the finished product and then how to do it. Lastly, it does not tell you all the tools you are going to need on the site.
After I bought this plan I found out I needed a band saw, a 12" table saw, an orbital sander and a biscuit joiner. (The only real problem was the 12" table saw and biscuit joiner, I had the rest.) All and all, I love the way it turned out but hate how much extra work I needed to do to get there.
No, I would not recommend this to a friend
1 - 2
Back to top
©2014 by Woodcraft Supply LLC