Buy Complete Mortising Attachment Kit at Woodcraft

Zoom In

Complete Mortising Attachment Kit

Item #813890
$119.99
Qty.  
 
or Add to Wish List


 
 
3.5

(18 reviews)

Read 18 Reviews | Write a Review


Pin It

Product Information:

Fits most Delta and Sears models and any other drill presses with 66 mm (2-5/8"), 50.8 mm (2"), 48 mm (1-7/8") or 38 mm (1-1/2") dia. quills. Fence bolts to drill press table and provides 4" under the hold down rods. Kit includes an attachment, fence, hold down rods and four chisels & bits (1/4", 5/16", 3/8", 1/2").

Blog
 
DELTA's Back, The USA Way
Back in January, we did a story on Stanley Black & Decker selling DELTA. Here is the result of the new DELTA acquisition! The DELTA Power Equipment Corporation is a new wholly-owned subsidiary of Chang Type Industrial Co. Ltd., a Taiwan-based manufacturing company. After the announcement of DELTA PEC’s deal to purchase the DELTA brand... [read more]
 

REVIEW SNAPSHOT®

by PowerReviews
 
3.6

(based on 18 reviews)

89%

of respondents would recommend this to a friend.

Pros

  • Easy to use (14)
  • Easy to store (9)
  • Ergonomic (2)
  • Compact (2)

Cons

Best Uses

  • In the workshop (12)
  • Frequent use (3)
  • Heavy duty (2)
  • Reviewer Profile:
  • Casual do-it-yourselfer (8), Avid do-it-yourselfer (7), Professional (3)

Displaying reviews 1 - 10

Back to top

| Next »

1/10/2012
 
5.0

Love it

By  Roy

from Anchorage, Ak

About Me Casual Do-It-Yourselfer

Verified Buyer

Pros

  • Cut nicely in hardwood
  • Easy To Store
  • Easy To Use

Cons

  • NONE FOUND

Best Uses

  • In The Workshop
  • Woodhobbist

Comments about Complete Mortising Attachment Kit :

making small mortise & tenon joints

Bottom Line Yes, I would recommend this to a friend

Please let us know what kind of issue this is:

6/24/2011
 
4.0

Limited budget

By  Dicks woodworks

from Long Island, NY.

About Me Casual Do-It-Yourselfer

Verified Reviewer

Pros

  • Easy To Store
  • Easy To Use
  • Reasonably accurate

Cons

Best Uses

  • In The Workshop

Comments about Complete Mortising Attachment Kit :

On a limited budget this morising attachment works great. I am sure a dedicated mortiser could do a better job, but for my purposes it works great. Setup was easy and with little practice I was making perfect mortises.. I would suggest a new backer board with each new setup to avoid splintering the wood upon breakout.. It is important to enter the wood on the face that will be seen. In that way any breakout will be covered by the joint on the back side.

Bottom Line Yes, I would recommend this to a friend

Please let us know what kind of issue this is:

4/5/2011
 
4.0

Simple but very functional

By  Jack of all Trades and a master of none

from Elk Grove

About Me Avid Do-It-Yourselfer

Verified Buyer

Pros

  • Easy To Store

Cons

  • Alignment tricky

Best Uses

  • In The Workshop

Comments about Complete Mortising Attachment Kit :

The most difficult part of the set-up was aligning the fence to the cutting tool, but was otherwise relativly easy to use.

Bottom Line Yes, I would recommend this to a friend

Please let us know what kind of issue this is:

2/15/2011
 
4.0

Mortising Kit

By  tom

from Boise, ID

About Me Casual Do-It-Yourselfer

Verified Buyer

Pros

  • Easy To Use

Cons

Best Uses

  • In The Workshop

Comments about Complete Mortising Attachment Kit :

Good for the use advertised

Bottom Line Yes, I would recommend this to a friend

Please let us know what kind of issue this is:

1/2/2011
 
4.0

Very good product.

By  walmsls

from Wellington, CO

About Me Avid Do-It-Yourselfer

Verified Reviewer

Pros

  • Easy To Store
  • Easy To Use

Cons

  • Not for the lazy person
  • Requires accurate setup

Best Uses

  • In The Workshop

Comments about Complete Mortising Attachment Kit :

I was close to buying a dedicated mortiser, however I chose this product knowing I have less money, a square and patience. I used this on my Delta 17-968, no shims needed. After setting up and assuring all relevant points were square, I performed my test cuts. These were spot on to the markings and reproduced for my real cuts. The hold downs worked great and had to be loosened to allow my piece to move. The convenience of my set up was the use of a variable speed drill (~1000 rpm, 3/8" bit). One negative was I had to use additional washers to bolt the fence down since the underside of my drill table had ridges that the provided nuts did not fit into, an easy fix. Great product for the money!

Bottom Line Yes, I would recommend this to a friend

Please let us know what kind of issue this is:

9/10/2010
 
3.0

Mortising

By  Bob

from Sanford, Fl.

About Me Avid Do-It-Yourselfer

Verified Buyer

Pros

  • Easy To Use
  • Good Grip

Cons

  • Heavy

Best Uses

  • In The Workshop

Comments about Complete Mortising Attachment Kit :

Not as exact as a mortising machine but good for small projects

Bottom Line Yes, I would recommend this to a friend

Please let us know what kind of issue this is:

6/13/2010
 
3.0

Does the job

By  Jake

from Saint Cloud, MN

About Me Professional

Verified Reviewer

Pros

  • Easy To Use

Cons

  • Limited Fence Abilities

Best Uses

  • In The Workshop
  • Stock under 4"

Comments about Complete Mortising Attachment Kit :

If you don't have room for a dedicated mortising jig, then this will work just fine. The fence is limited to smaller projects. If larger projects are to be intended, a different fence will need to be made to use more effectively. I used this with a Delta drill press.

Bottom Line Yes, I would recommend this to a friend

Please let us know what kind of issue this is:

3/30/2010
 
4.0

Lived up to Expectations

By  Tim the Real Tool Man

from Green River, WY

About Me Avid Do-It-Yourselfer

Verified Buyer

Pros

  • Easy To Store
  • Easy To Use

Cons

Best Uses

  • In The Workshop

Comments about Complete Mortising Attachment Kit :

Used the Mortise and Bit tool to cut 1/2" Square Holes into hard wood step treads and railing for 1/2" Rod Iron Bulsters, worked great even at an angle...

Bottom Line Yes, I would recommend this to a friend

Please let us know what kind of issue this is:

2/17/2010
 
4.0

Complete Mortising Attachment Kit

By  dlmeek

from Kent City, Michigan

About Me Casual Do-It-Yourselfer

Verified Buyer

Pros

  • Easy To Store
  • Easy To Use

Cons

Best Uses

  • In The Workshop

Comments about Complete Mortising Attachment Kit :

The attachment works great on my drill press. I just wish it fit the press more snuggly. The yolk has a tendancy to turn slightly when being used.

Bottom Line Yes, I would recommend this to a friend

Please let us know what kind of issue this is:

1/29/2010
 
1.0

Make sure it fits your Drill Press

By  Sleddog

from Cleveland,OH

About Me Avid Do-It-Yourselfer

Verified Reviewer

Pros

Cons

Best Uses

Comments about Complete Mortising Attachment Kit :

I tried to attach this unit to a Delta 11-990 Drill Press which it is supposed to fit. It doesn't. The quill is 2-1/16', the kit doesn't have a split ring this size

Bottom Line No, I would not recommend this to a friend

Please let us know what kind of issue this is:

Displaying reviews 1 - 10

Back to top

| Next »