Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 1
Back to top
Best Carving Tool Sharpening
Koch System Yellow Wheel, Fine Grind
As a woodworker for 40 years I've owned just about every conceiveable sharpening tool, jig, machine, stone, sandpaper on glass,etc., that exists. The Koch wheels sharpening method was recommended by a couple of pro carvers who's advice I respect. The Koch system is actually so good it's shocking! Woodcraft no longer sells the complete system with grinder but purchase the yellow and green wheels with green paste. The wheels are actually identical but dedicate the green for flat tools(incl V tools) and the yellow for rounded gouges, etc. Red and blue wheels w/ white paste not necessary. Use a slow or vari speed grinder with 1/2" arbor (2,000rpm max). The arbor holes are too tight (German made undersized) so drill them out with a 1/2" bit. You need to take off the side wheel guards and turn the grinder around to the back, as the wheels are meant to turn up and away from you (not down as all traditional grinders do). Fabricate your own tool rest. I used a 5/8" steel bar running horizontal in front of the wheels level w/ center and 5/16" in front. Razor sharp, no burr (really), and lightning fast. I sharpened 28 carving tools including several V tools in 15 minutes and they were sharper than I have ever seen. Used to take most of a day. IMO no better sharpening system exists for carving tools... that's a strong statement, but I stand by it.
Yes, I would recommend this to a friend
1 - 1
Back to top
©2014 by Woodcraft Supply LLC