Shop Now & Save 10% on Laguna Tools
October is the month to save on Laguna Power Tools at Woodcraft.
Shop & Save 10%
RIKON Benchtop Bandsaw Now $90 Off
This little beaut will fit in any shop!
Get Yours $199.99
Save $500 on Nova DVR XP Lathe
Don't miss your chance to save $500 on this "intelligent" lathe.
Now Only $1,899.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 5
Back to top
Decent Basic Vise
7" Groz Front Vise Hardware
I bought this vise several years ago for my portable woodworking bench. While I agree with some of the sentiments of the other reviewers, I think it has performed well for the price I paid for it. I use an adjustable wedge on the opposite side of my work piece to counteract racking. I didn't expect a vise at this price to not rack, but am looking forward to an upgrade.
When using a wedge though, the vise has plenty of clamping power. Like another reviewer mentioned, the pin broke pretty quickly that holds the "T" connecting the wood handle to the threaded rod. I replaced this with a small stainless bolt and have had no problems with anything else in the past 5 years.
If you have the money, consider a higher end vise but if not, I think this vise can serve as a good introductory vise. I will be replacing it with a twin screw design for my front vise, but will likely keep this to add a small tail vise to my bench.
Yes, I would recommend this to a friend
Sould have read the reviews before hand
This is a very poor product. No instructions, no template to use for building the jaws. The ends of the wooden handle are attached with 1/2 inch brass plated screws that don't stay on. It racks like no vise I have ever used.
No, I would not recommend this to a friend
Bought vise shortly before I moved. About 1 year later I got around to finishing my work bench. I would have followed the instructions if they would have been included. After installing the spacer and the housing, I inserted the screw with the guide rods and gave it a test turn - the head snapped off the shaft. I would like to think it was my awesome strength, but alas it was just a poorly made vise. On the up side, in my .3 seconds of use - I had no problems with racking.
How fast can it sink?
Difficult to install, a hollow flimsy handle, and the racking, My God the racking.....
I will preface this review buy saying this is the first front vise I have bought, and perhaps mine was defective....however, having said that....after many hours of preparing nice, solid hardware jaw inserts and meticulous installation, I have found that the vise racks so much as to be almost useless. Perhaps overkill, but I am now considering the veritas twin screw.....you get what you pay for usually!
1 - 5
Back to top
©2014 by Woodcraft Supply LLC