Buy Dust Extraction Fitting Funnel Reducer 4 x 2-1 4 at Woodcraft

Zoom In

Dust Extraction Fitting, Funnel Reducer, 4" x 2-1/4"

Item #147759
$4.19
Sale! $3.14
Qty.  
 
or Add to Wish List


 
 
4.0

(8 reviews)

Read 8 Reviews | Write a Review


Pin It

Product Information:

This fitting gives you the advantage of a pliable material that flexes more than the traditional ABS that makes up most dust extractions. This is especially important in installations where the reducer lies on the floor and is prone to an occasional stumble or bump. The smooth transition from 4" to 2-1/2" allows the user to connect their 4" ported equipment to a shop vacuum with only a minor loss in flow.

  • Advantage of a pliable material that flexes more than the traditional ABS
  • Designed to stand up against the abrasive nature of saw dust and wood fiber
  • Economical
  • High performance dust extraction


    •  

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.1

    (based on 8 reviews)

    88%

    of respondents would recommend this to a friend.

    Pros

    • Easy to use (6)
    • Lightweight (3)
    • Efficient (2)

    Cons

    Best Uses

    • Reviewer Profile:
    • Frequent user (5), Occasional user (3)
    • Primary Use:
    • Personal (6), Business (2)

    Displaying reviews 1 - 8

    Back to top

    |

    4/10/2012
     
    5.0

    Sweet Solution

    By  Terrybill

    from Minnesota

    About Me Occasional User

    Verified Buyer

    Pros

    • Easy to Use

    Cons

    Best Uses

    Comments about Dust Extraction Fitting, Funnel Reducer, 4" x 2-1/4" :

    Used this to get from the 4" output under my table saw (with the 149581 flex hose in between) to use my shop vac for dust extraction. The 2 1/4 output is the same diameter as the vac hose so a simple coupler got them together. To date no clamps needed anywhere. Very pleased.

    • Primary Use:
    • Personal

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    1/31/2012
     
    5.0

    Good product but not what I needed

    By  PC

    from NJ

    About Me Frequent User

    Verified Buyer

    Pros

    • Inexpensive good quality

    Cons

    Best Uses

    Comments about Dust Extraction Fitting, Funnel Reducer, 4" x 2-1/4" :

    The add doesn't state if the dameter of the reducer is the inner diameter or outter diameter. It should be noted that the diameter stated in the add is the outter diameter, NOT the inner diameter. This reducer is used to connect to a 4" dust collection hose, where the 4" hose fits over the 4" reducer. I purchased the reducer to fit over a 4" dust collection port of a bandsaw, so I needed a 4" inner diameter. Otherwise, it's a quality item at a very reasonable price. And I have to make mention that Woodcraft has an absolute no hassle return policy. They even refunded the cost of the return shipping. 2 thumb up for Woodcraft!

    • Primary Use:
    • Personal

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    8/22/2011
     
    1.0

    Does Not

    By  Mystic1

    from Rochester, WA

    About Me Occasional User

    Verified Reviewer

    Pros

    Cons

    Best Uses

    Comments about Dust Extraction Fitting, Funnel Reducer, 4" x 2-1/4" :

    I thought this would connect my shop vacuum to 4" fittings. It does not. It is the opposite. It will connect a 4" hose to a 2 1/2" port.

    • Primary Use:
    • Personal

    Bottom Line No, I would not recommend this to a friend

    Please let us know what kind of issue this is:

    8/17/2010
     
    4.0

    Works well

    By  Jimi C.

    from St. Louis, MO

    About Me Occasional User

    Verified Reviewer

    Pros

    • Easy to Use
    • Lightweight
    • Powerful/Good Suction

    Cons

    • Inefficient

    Best Uses

    Comments about Dust Extraction Fitting, Funnel Reducer, 4" x 2-1/4" :

    Hooked up to a Ryobi AP1301, which can best be described as having horrible dust collection capabilities. When I used to use my shop vac on this, I would have to stop every few passes to clear clogs of wood chips. After upgrading to a 2HP DC with 4" pipes, I got this to connect to the planer and it works great - zero clogs. The con is it does considerably reduce the CFM of the dust collector, but as a stop gap until I get a better planer this was worth every cent.

    • Primary Use:
    • Personal

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    7/28/2010
     
    5.0

    Works great!

    By  DeCarlo Woodworks

    from Apex, NC

    About Me Frequent User

    Verified Buyer

    Pros

    • Easy to Use
    • Efficient

    Cons

    Best Uses

    Comments about Dust Extraction Fitting, Funnel Reducer, 4" x 2-1/4" :

    Works great to connect 2.25 hose to 4 inch.

    • Primary Use:
    • Business

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    3/23/2010
     
    5.0

    I will be ordering this product again,

    By  Monty

    from Williamsburg, VA

    About Me Frequent User

    Verified Buyer

    Pros

    • Easy to Use
    • Efficient
    • Lightweight

    Cons

    • NONE

    Best Uses

    • Installing branch lines

    Comments about Dust Extraction Fitting, Funnel Reducer, 4" x 2-1/4" :

    Needed to run branch lines off the 4 inch main. THis worked well.

    • Primary Use:
    • Personal

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    2/25/2010
     
    4.0

    Handy for a change

    By  PRSNEEKS

    from Versailles, Ky.

    About Me Frequent User

    Verified Buyer

    Pros

    • Easy to Use
    • Lightweight

    Cons

    Best Uses

    • Changing from two sizes

    Comments about Dust Extraction Fitting, Funnel Reducer, 4" x 2-1/4" :

    Use in my wood shop for dust collection . Use a 4" and 2 1/2" line so this comes in handy .

    • Primary Use:
    • Business

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    2/10/2010
     
    4.0

    Just the right item for the job

    By  Jim

    from Deming, NM

    About Me Frequent User

    Verified Buyer

    Pros

    • Easy to Use

    Cons

    Best Uses

    • Ridgid MS2190 CMS

    Comments about Dust Extraction Fitting, Funnel Reducer, 4" x 2-1/4" :

    Fits dust port of saw perfectly.

    • Primary Use:
    • Personal

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    Displaying reviews 1 - 8

    Back to top

    |