Buy Freud P410T Fusion Circular Saw Blade 10 x 5 8 Bore x 40 Tooth Thin Kerf at Woodcraft

Freud P410T Fusion Circular Saw Blade 10" x 5/8" Bore x 40 Tooth Thin Kerf

Item #845842
$79.97
Qty.  
 
or Add to Wish List


 
 
4.5

(4 reviews)

Read 4 Reviews | Write a Review


Pin It

Product Information:

The Thin Kerf Fusion tooth design fuses Freud’s 30° Hi-ATB tooth with Freud’s unique double side grind tooth geometry. The design provides a glass smooth side finish while also giving a flawless top & bottom finish in veneered plywood, hardwoods, and melamine.



  • One Blade Does It All—Crosscuts & Rips
  • Freud engineers have discovered the ultimate combination of fused tooth grind geometry
  • A special carbide blend and superior carbide brazing
  • Whether you’re ripping or crosscutting, a Premier Fusion blade will tackle any project.
  • Non-stick Perma-SHIELD coating reduces gumming, rusting and corrosion



  • Articles:

  • CHOOSING THE RIGHT TABLE SAW BLADES - Ever wonder if your table saw blade does what it’s supposed to?
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.3

    (based on 4 reviews)

    75%

    of respondents would recommend this to a friend.

    Pros

    • Cuts fast (3)
    • Good design (2)
    • Keeps its edge (2)
    • Safe (2)

    Cons

    Best Uses

    • In the workshop (3)
    • Upgrade (2)
    • Reviewer Profile:
    • Avid do-it-yourselfer (2), Casual do-it-yourselfer (2)

    Displaying reviews 1 - 4

    Back to top

    |

     
    5.0

    New level of work

    By  Wansfel

    from Montana

    About Me Casual Do-It-Yourselfer

    Pros

    • Cuts Fast
    • Good Design
    • Good Value
    • Keeps Its Edge
    • Long Lasting

    Cons

    • None

    Best Uses

    • In The Workshop
    • Replacement
    • Upgrade

    Comments about Freud P410T Fusion Circular Saw Blade 10" x 5/8" Bore x 40 Tooth Thin Kerf :

    This blade has made the biggest impact on my work of all the tools I use. I have an old contractor Rockwell Delta saw I installed a Delta/Bessmeyer fence. Correctly alligned, this combination allows perfect polished edges for jointing rip or cross cut. I use my jointer far less now. Quiet, clean, polished cut surfaces its still performing well after some hard use in oak, walnut, plywood, and hardboard. I did clean the blade as it had started to burn some in long rip cuts much over 3/4 inch which returned it to its original performance. Inspecting the teeth while cleaning - they look like brand new yet.

     
    2.0

    Overpriced!

    By  jta

    from Pensacola, Fl

    About Me Avid Do-It-Yourselfer

    Pros

    • Cuts as advertised

    Cons

    • Poor Value

    Best Uses

    Comments about Freud P410T Fusion Circular Saw Blade 10" x 5/8" Bore x 40 Tooth Thin Kerf :

    Really disappointed. Requested as xmas gift, since I don't normally spend this much for a blade. Rips fine with little or no tearout. Cross cutting in soft wood leaves a damaged edge. Replaced with $29.95 blade half way through current side table project.

     
    5.0

    Added to my Freud collection

    By  Jer....o~\o

    from Fort Garland, CO

    About Me Casual Do-It-Yourselfer

    Pros

    • Clean cuts- little sandin
    • Cuts Fast

    Cons

    Best Uses

    • In The Workshop

    Comments about Freud P410T Fusion Circular Saw Blade 10" x 5/8" Bore x 40 Tooth Thin Kerf :

    Clean consistent cuts ready for glue-up. Made laminated cutting board. Ready to step into re-sawing- will precut before band sawing.

     
    5.0

    Absolutely Amazing!!!

    By  Keith

    from Port Clinton, OH

    About Me Avid Do-It-Yourselfer

    Pros

    • Cuts Fast
    • Durable
    • Good Design
    • Keeps Its Edge
    • Safe

    Cons

    • None

    Best Uses

    • In The Workshop
    • Upgrade

    Comments about Freud P410T Fusion Circular Saw Blade 10" x 5/8" Bore x 40 Tooth Thin Kerf :

    I never thought I would purchase a blade for this price but I should have done this years ago. As listed, "a thin kerf, less weight, and less strain on low horsepowered machine," they were right. I have a Shopsmith and this was ideal for this machine. This blade cut right through the pieces like it was warm butter. I plan to order another for my radial arm saw. A truely great saw blade!!!

    Displaying reviews 1 - 4

    Back to top

    |