Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 2
Back to top
You need to buy TWO (2)!
Forest City, NC
Festool Guide Rail Connector 1 per Pack - 2 Recommended
As my title says, if you are going to use these to join two guide rails for the TS-55 or TS-75 you will need to purchase two. Why they don't come in a two-pack is beyond me.
Plus, I think they are a bit pricey for a straight hunk of metal with four set screws, but that's Festool.
Also, the set screws have shallow slots. After 4 or 5 uses the slots are already worn from the screw driver slipping. I will be looking for Allen wrench (hex hole) set screws to replace them.
Other than that they do what they're supposed to. I recommend it if you need it. I have a 55" track and a 42" track. Joined that gives me a 97" track for cutting down the length of sheet goods, but with no run-on or run-off for the saw, which makes cutting the ends awkward and potentially sloppy. Two 55" rails joined would be better. But I may eventually pop for a 106" rail.
Yes, I would recommend this to a friend
HOWEVER - Some Guide rails can be difficult to align properly. Check that the ends are machined to exactly 90 deg.
1 - 2
Back to top
©2014 by Woodcraft Supply LLC