Save 10% on Select Power Tools
Now's your chance to save on power tools. July 25 & 26 only.
Save 20% on Wood Supplies for Your Shop
What will you make?
15% Off Shop Accessories
Save on stools, mats, supports and more!
Outfit Your Shop
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
WoodRiver Dust Nozzle 12" x 16" With Floor Stand
Fine if it happens to fit your location, connections and tools. Otherwise prepare to figure out how to modify it to work.
No, I would not recommend this to a friend
dust collection on buffing machine
Yes, I would recommend this to a friend
The product is great for sanding
Dutchess County, NY
I use this when sanding to reduce the cloud of dust that results. A powerful dust collector is needed or it will not be that effective. (I use a 3 horsepower cyclone system and it works fairly well.) I also have a HEPA filter on the dust collector so the dust is properly screened out.
Close to perfect (but not quite)
Man Cave Marvel
The only problem is that the diameter of the outlet is slightly too large to support 4" quick disconnects, including the one that Woodcraft itself sells.
It does exactly what I needed it to do!
The bat guy
I use the Dust Hood with my mini lathe when sanding my turned tops. It has made a huge difference in the dust level in my small shop. It fits perfectly on the back side of the lathe and catches 98% of the sanding dust.
This product sucks
It is used to capture saw dust that ordinarily would be flying around my small workshop.
This unit collects about 50% of saw dust from a radial armsaw. The construction is inprecise. Longing for US Made products.
Made well, very stable
Bought for use with lathe. Still trying to find a location that catches most of the shavings. Made well, stays were you put it. 4" quick disconnect fittings don't quite fit.
Another quality product from Woodcraft
I bought this to catch sawdust from my tilting, slide chop saw. Other commercial collection devices were too big or cheap-looking. This seemed just right, and it is. It's heavy enough to stay put, it's not top heavy and not prone to tipping over, and the mouth of the collection cone is about the right size for the sawdust spray that comes from my saw. It is built to high quality standards, something I've come to expect from Woodcraft. The angle adjustment for the hood has an indexed ring so the cone will stay at the angle you set it at and it won't slip "head down" or "head up" during use. The ONLY aspect which I was disappointed with as others seem to have noted was the 4" pipe at the end where dust collectors would attach. The tube is made of steel and is painted. The "matching" fittings for connect dust collectors that are available in most home or tool stores are ABS and of a size where fitting the two together is almost impossible. My suggestion is to either have Woodcraft make a slightly larger diameter tube for its stand or for the buyer to create a way to keep that tube and the vacuum hose connected without falling off on its own. Other than that, I am very glad I bought it.
Need a jet engine for intake!
Santa Maria, CA
I use it with a wood turning lathe. It might catch some of the fine dust but certainly not all. It needs a "big" vacuum to be efficient. My vacuum is a 6.5 hp shop-vac and it is not enough for the large open mouth of the hood.
1 - 10
Back to top
©2014 by Woodcraft Supply LLC