Save $50 on Freeman Combo Kit
Includes a 2" Brad Nailer and 1" Micro Pinner.
Buy Now $69.99
WoodRiver® Universal Mobile Base Kit
Save $13 and go mobile with this Mobile Base Hardware Kit.
Now Only $49.99
Pizza Time! Save $3 On This Pizza Kit
This heavy-duty Pizza Cutter features a 2½" stainless steel blade.
Make Yours! $9.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
Worse than useless
Norton Flattening Stone with Case
Bought this to dress my norton waterstones. It worked OK for the first couple times, but rapidly developed an arch where the outside edges wore down more quickly. Maybe I didn't use it precisely right, but it went out of true very quickly & then dished out my stones.
Replaced it with a diamond plate that is absolutely flat & dresses the stones quickly. True, there is a lot more adhesion between the plate and the stones, and I have to stop and wash off the slurry periodically but everything comes out completely flat.
No, I would not recommend this to a friend
Works great for me!
I use the flattening stone to maintain my Norton sharpening stones. I place the flattening stone on a slab of granite (sink cutout piece) I use as a sharpening station. I work the sharpening stone over it until pencil lines are gone. Usually takes less than 2 minutes. I flatten stones after every other plane blade sharpening.
Yes, I would recommend this to a friend
This is a much better way to flatten your water stones than a piece of glass and sandpaper. Highly recommend.
Inexpensive Lapping plate
If you don't want to spend $100+ for a diamond stone to lap your water stones it is a good alternative. Diamond stones are much faster. If you get a diamond stone for lapping get a very course stone (>200 grit). I used this stone to flatten 6 very badly hollowed stones I inherited from my father and it works but it's alot of work. The grooved surface does make it more fragile if you're not working on a flat surface so find one and place some padding underneath the stone.
Makes your waterstones like new again!
I saw some critical reviews of this product which almost lead me to not purchase it. They seem to me totally unfounded. This tool works just fine. Yielded a very flat stone with a decently smooth surface and worked efficiently.
Not worth it.
I do not recomment this stone for flattening. I have used this stone several times and have always noticed that it humps up the middle of my sharpening stone. The problem is that it tends to roll from side to side as you push it back and forth. I use hand planes all the time and I need my shapening stone to be flat so that I get a good edge on the plane blade. I do, however, like to use the back side of this stone to get rid of nicks and dips in the edges of plane and chisel blades. I would not get this to use as a flattening stone, instead get a diamond or granite plate, not as cheap, but better in the long run and more for the money.
It cannot use.
The plane has not come out.
It cannot use.
I have used this to grind a chip out of a 2 inch blade, It does dish out quickly. When I use it to flatten the 1000,4000, and 8000 grits this stone leaves its grit behind in the slurry. Not the best conditions for sharpening. The stone also cuts really slowly.
Not worth the money
Embedded particles in my polishing stones. Took several hours with wet/dry paper on a piece of glass to get out. The thing dished out too easily. Get a DMT diamond stone for flattening stones. You'll be much happier.
I purchased the Norton as the water stone set. I watched the DVD and read all the instructions. I soak all the stones and flattening stone at the same time. I was very careful with all the stones and handling. When I went to lift the flattening stone out of the water it broke. It had not even been used yet. Very disappointing.
1 - 10
Back to top
©2014 by Woodcraft Supply LLC