Take your table saw to a higher level of precision and performance with the New Mast-R-Slide™ Sliding Cross-Cut Table. A sliding table allows you to cross cut larger panels than a miter gauge or cross-cut sled and provides a safer and more stable means of supporting the work-piece through the cut. This high quality table saw system features a network of beautifully engineered aluminum extrusions, steel guide rails and precision bearings designed to create the ultimate cross-cutting solution. - Designed to replace the left extension wing on most American style cabinet saws and contractor saws, it bolts easily onto the saw with a quick, no-hassle setup.
- The Mast-R-Slide system features JessEm's innovative Posi-Trak™ bearing guided multi-rail system for an exceptionally smooth and accurate glide from one end of the travel range to the other.
- The guide mechanism is comprised of 30 double-sealed precision bearings positioned in a staggered design to provide constant contact to the guide rails throughout its travel. The sliding table is easily adjustable to level with the saw's tabletop and to align it parallel to the cutting blade.
- Also included is an outrigger support table that is fully adjustable for positioning in a fixed location anywhere along the length of the sliding table.
- The 28" extruded aluminum fence extends outward for a maximum measured cut length of 48" with the flip-stop, and makes mitered cross-cuts up to 45° in both directions.
- The Mast-R-Slide Sliding Table offers three positions for the fence, two front end positions (one optimal location for mitered crosscuts and another allowing for an increased cutting width at 90°) and a rear end position for a maximum cross-cut capacity of 36".
- The fence is easily moved from one position to the other and quickly removes from the sliding table for unobstructed use of the table saw while utilizing the rip fence.
The Mast-R-Slide 7500 requires no support legs offering a smaller footprint and allowing the optional use of a mobile base on the saw, making it the perfect small shop sliding table. Fits right or left-tilt table saws and is designed to be used on the left side of the saw. The table saw must have a solid cast iron top. Table saws with a four-hole extension wing mounting pattern require drilling two additional holes. Note: The position of the saw blade varies from saw to saw and slightly affects the maximum cross-cut capacity.
Specifications-- Max stroke: 37"
- Length of cut off fence: 28" extends to 48"
- Length of rail system: 27"
- Sliding Table Dimensions: 7-7/8" x 40"
- Outrigger Table Dimensions: 8-1/2" x 8-1/2"
- Sliding Table Width including Outrigger: 16-3/8"
- Max Cross Cut (w/fence in front position): 33"
- Max Cross Cut (w/fence in middle position): 24-1/2"
- Max Cross Cut (w/fence in rear position): 36"
- Unit Weight: 48 lbs
California Residents: Click
here for Proposition 65 information.