Save $400 on NOVA 1624-44 Lathe
This may be the only lathe you'll ever need. $999.99 Right Now!
It's a GRR-Ripper Double Pack!
Work safer and more accurately with GRR-Ripper.
Sand & Save $40
You won't find a better sander for less!
While Supplies Last!
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
Useful. Watch dimensions
Port-A-Mate Adjustable Mobile Base PM-1000
Goes together well and allows me to move my table saw with relative ease. Doesn't "steer" all that easily, but gets the job done.
I have a DeWalt Job Site saw, and the foot dimensions were, I think, 37 x 24 (sum = 61) Although the range of sizes is given as 34x34 (sum 68) to 18 x 50 (sum 68), the saw didn't fit. (You get two long and four short rails, and not all combinations are possible.) (My memory is a little foggy on the specifics, but you get the idea) I called Woodcraft returns, and they promptly send me two more rails without charge. I appreciated that. With that, the problem was solved.
Yes, I would recommend this to a friend
Good value for an easily adaptable tool.
Works great for my drill press. Very easy to assemble and use.
Looking for something stronger
My Delta Uni-saw is a little to heavy for this product. The levers are made of aluminum and bend easily when raising the saw to move. Other than that it is a well made product.
I would buy this product again
Bought this mobile base for my 14" bandsaw as I have a small garage workshop. The base was easy to assemble and has made moving my bandsaw extremely easy. I will be buying a couple more for my scroll saw and table saw.
It works OK, I am using for a drill press. The base of your machine or added platform in my case is only supported in the corners which is OK. Problem is that because of slop in the rails the corner support areas will not be coplaner.
The corner areas provide mounting holes for an added base. I built up a 1.5 inch plywood base and put lag bolts from the underneath to mount it. A potential problem is that the mobile base sits so low that the lag bolt heads are only about 1/4" off the floor.
Finally, the cantilever wheels used to make the base move feel flimsy and don't sit absolutely perpendicular to the floor when extended which means they fight a little - won't rotate direction easily.
One last issue is that the two wheels used to raise the base are lowered separately. I need both hands to lower one wheel so the base tips while I do the first wheel.
The base works fine for me, I move my drill rarely and given how heavy it is this product is better than my shop made base. I would not use it on something I move more than once a week.
must have for any shop large or small
jamestown new york
I own 7 of these bases they are under every piece of equipment i have in my shop from my drum sander to my table saw.they make a small shop seem big cause you can move your equipment with ease.
Easy to assemble and very mobile
I have limited space, the mobile base makes it easy my tools around for use
I bought this for my table saw, so I could more easily move it around the garage so my wife park her car in there also. The locking casters work well to keep it in one place, when unlocked, it's easy to move around
Adds mobility when you have limited space
All tools should be mobile
very rural outside Lobelville, TN
Although I have a big shop, 40x48, I like to move my tools around as needed to best utilize floorspace. Mobile bases allow me to quickly change from woodworking to vehicle/tractor maintenance. Love it.
1 - 10
Back to top
©2014 by Woodcraft Supply LLC