New Festool TS 55 REQ Plunge Cut Saw
Festool has made the best plunge saw better.
JET Benchtop Spindle Sander
Save $100 on this customer favorite!
Save $50 on HTC-3000 Mobile Base
Fully adjustable, holds up to 700 lbs.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
cheeper at [...] ([$])
Wixey Digital Planer Height Gauge
Like how you know exactly whatt the thickness you are planing your lumber to.
Yes, I would recommend this to a friend
San Diego, CA
This gauge is amazing in everyway. To be able to be acurate to within 1/1000 of an inch on any project is a woodworker's dream. Wixey makes great digital reader products. Highly recommended.
a little tricky to setup
First unit I got was defective, the LCD display wouldn't show all the numbers. [...]Since this thing mounts to the plastic shell around my Dewalt planner, it was tricky to properly get setup plumb and square. If you don't get it properly plume and square, it binds as you try to use it. After I finally got it properly installed, it does work great. I would recomend this product.
socorro new mexico
good reference point visually of thickness planed
TAKES THE GUESS WORK OUT OF IT
SIOUX FALLS SD
AS A MACHINIST I USE CNC EQUIPMENT EVERY DAY. THIS TAKES PLANING MATERIAL TO THE RIGHT THICKNESS TO THE NEXT LEVEL. I LIKE IT, AND USE IT OFTEN. THE INSTRUCTIONS MAKE SENCE AND I HAD IT INSTALLED IN 15 MIN.
Somewhat easy to set up and to use.
Good Hope, WV
The Delta machine I instaled it on only had a scale up one side. I like this unit. It shows just how much material I'm removing.
A good device for accuracy
I am finally able to get repeated accuracy with my planer. The directions were hard to understand, but I went to the web site and saw a picture and understood how it installed. I find that it is best to recalibrate the device each time I turn it on to use it, but it is easy to do. It is by far superior to using the calipers to try to get the accuracy I want.
More than I expected
The instructions were hard to understand, but I went to the website and saw a picture understood and what needed to be done. It needs to be calibrated every time it is used if you are looking to be exact on your thickness, but it is easy to calibrate. It is easy to read the digital display or the lineal scale if you just want to be close, better than the manufactured scale. This device is a must for us type "A"'s.
Penny wise, pound foolish
Cape Cod, MA
It would be difficult to attach this to my York Craft planer, nad the gauge. fitted to the table, would rise above the machine when making cuns in thin stock, leaving it exposed where it could ber hit and broken.
kAt thkree times the cost, I purchased a Jet model which was made to be atached to many Taiwanese machines, including lmine. Despite the tripled cost, it was a bargain.
No, I would not recommend this to a friend
Last model of the digital planer
montreal , QC
Not yet in use. The model that appear on your web site is inexacte. I have received the last version of this item that have a différent aspect.
1 - 10
Back to top
©2013 by Woodcraft Supply LLC