Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 7
Back to top
Teknatool 1" - 8 TPI Insert w/set Screw for Nova Chucks
High quality nice addition to my shop.
Yes, I would recommend this to a friend
matched up on my jet lathe perfectly
Chuck won't work without it.
can't use the chuck with out it.
It's Only OK
This particular item from Woodcraft has both a 1" X 8 TPI Left-hand and right-hand internal thread to attach to both ends of my lathe spindle. The first one did not thread cleanly onto my spindle. I purchased a second one, and it was just like the first.
I wound up chasing the RH threads with a 1" X 8 TPI threading tap, and it worked OK after that.
TeknaTool does offer a RH-thread only adapter, but Woodcraft apparently does not carry it.
I have said I would recommend to a friend, but only because there were no alternatives to adapt the SuperNova chuck to my lathe.
This should not be an extra-cost item, but should have been included with the chuck.
Lake Charles LA
It is of excellent quality. But..is over priced and should have come with the chuck.
What was needed..why not included?
Ft. white, FL
Item was needed to be able to use Nova Chuck..should have been advertised with the item as needed for lathes with a 1" 8TPI.
Tool Works Fine, Price TOO HIGH
The tool works fine, its just a nut, but a very expensive nut. Along with the shipping it was way too costly.
No, I would not recommend this to a friend
1 - 7
Back to top
©2014 by Woodcraft Supply LLC