Customer Service 1-800-225-1153 Product Support 1-800-535-4486
Please Note: This item can only be shipped ground to the 48 contiguous states. Some items cannot be shipped via air due to being flammable, magnetic, contains batteries, hazardous fumes or where contents are under pressure. Please use a physical address not a PO Box during checkout.
Freight items will be brought to the back of the delivery truck and it is your responsibility to unload. The driver will not help you. If you want delivery with a liftgate truck or wish to pick up the item yourself at the terminal, contact our Customer Service Dept. and they will work out the details and contact you with options.
(3 reviews)
Product Information:
California Residents: Click here for Proposition 65 information.
We've Found These Items Related to: Micro Jig 1/8" Kerf SteelPRO MJ Splitter Kit (Blue)
REVIEW SNAPSHOT®
(based on 3 reviews)
67%
of respondents would recommend this to a friend.
Displaying reviews 1 - 3
Back to top
|
Product works great.
By Buckeye
from Columbus Ohio
About Me Avid Do-It-Yourselfer
Pros
Cons
Best Uses
Comments about Micro Jig 1/8" Kerf SteelPRO MJ Splitter Kit (Blue) :
Product works great if you follow the directions and watch the online videos. I use it instead of the old delta splitter/guard which is awful. I like the two splitter option on this model because it allows you to set it up so both splitters push in opposite directions away from the blade. If you are not using a splitter and want one to reduce kickback but not get in the way, this one works.
Worked like a charm
By Christopher
from Fremont, CA
About Me Casual Do-It-Yourselfer
It worked for me. The instructions say you should drill the holes in one shot, without stopping or re-reaming the hole. I did this and had no problems. The splitters work like butter - no more burning the 1.5" maple! The directions are very detailed, and can therefore be confusing. Just understand that you'll need to make two ZCIs for this setup, one for the "double splitter" technique for plywood, MDF, and cross-cutting, and another "splitter & kerf keeper" for ripping solid wood. Lastly, search the MicroJig web site, or YouTube, for the installation video. That's by far the best thing you could do before doing the install.
Plastic template softens when drilling
By Richard
from Pacifica, CA
About Me
If you buy this product be very careful when you drill as the template can soften due to the heat generated by the drill bit, yielding mis-aligned holes. I wasted 35 dollars, and my ZCI has four unsymmetrical holes in it.
©2012 by Woodcraft Supply LLC