Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
Spindle bearing support installation
OBX fan and woodworker
WoodRiver Spindle Steady Rest
Recognized that modifications needed to fit up to Delta Midi 460 lathe. I filed slots and cut bolt length to fit in about 1hour. The tool is rugged and performs well
Yes, I would recommend this to a friend
el paso tx
worked well on my mini lathe even though it is not supposed to but it did what i needed it to do and it was the right price.
Change bearings to wheels
Mount Vernon, OH
The metal bearings marked the wood and should have been polyurethane like skate wheels material. But I replaced them with small one inch wheels I bought from WoodWerks that were for Pinewood Derby cars, and it works great.
This is built to last, so it is heavy. It seems like someone should have devised a quick way to install it on the lathe.
Doesn't fit the Delta Midi
Lady's Island, SC
Thanks WoodRiver & Woodcraft. I had nothing better to do last Sunday morning then spending a few hours filing down the bases of this steady rest so that it would fit my Delta 46-460 midi-lathe. There was nothing in any of your promotional material to let us know it wouldn't fit. It was too heavy to bother to send it back so the only option was to adapt.
It's sturdy, very heavy and now it works well even though we still have to deal with the scarring that the wheels do to the wood. Warning; finish sand last.
Give us all of the facts upfront so that we can make an educated decision.
No, I would not recommend this to a friend
South Jordan Utah
This unit would not fit my Delta Midi- although I was told it would at the store and I had to get it to a machinist friend to narrow the blocks from 1.40 to 1.25. When he went to do this, he noticed the base itself was not square to the upright. Bearings should be rubber coated as they leave marks that have to be sanded out. You will also need to de-grease the entire assembly and then wash your hands thoroughly before handling wood or getting this support anywhere near your project. Wood River brand SHOULD mean solid, well made, low feature for the entry level. Entry level should not mean a low quality product.
Great for the price
It fits perfectly on my 12" 46-700 Delta lathe. The bolt is long enough to work on 14" and 16" lathes with the supplied spacers. This makes it too long on my 12" lathe, but it was easy enough to cut off.
I needed to drill a 1" hole in a long rod and wanted to steady the end. I expected the steel wheels to leave marks, so I left the piece long so I could cut the ends off. It worked great.
La Porte In
It is a little tedious to install and it comes with no instructions.(a Wood River trait)It does the job. It does leave a mark on the wood but a light sanding removes it. For the money it works fine.
Sierra Mtns., CA
The tenon that is supposed to fit between the bed ways is too large to fit a Delta 46-460(and I suspect many other lathes with a 12" swing). I was able to use it by mounting it at an angle and adjusting the steady wheels accordingly. Setup and movement on lathe is clumsy. Bolt is too long and hits ways supports.The wheels are simply wheel bearings and leave marks on the surface of the wood. (They should be made of a non-marring material). In use, it is noisy. It will be more usable after I modify it by shortening the bolt and machining the tenon to a width the fits the space in the bed ways. I may replace the wheels with plastic wheels as well. The heavy duty cast iron of this product is solid. For the amount of modification I'll have to do, I would have been better off to have made my own or spent more for a better one. Check your lathe dimensions before you buy, especially the bed way space width.
I used it on long spindles. Limited placement on Jet 16/42. The bearings left marks on the wood- should have plastic wheels.
Used on my Shopsmith
I don't do a lot of turning but I needed to make a long (28") spindle to repair my daughter's crib. I didn't want to spend a lot of money. After modifying the mounting to work on my Shopsmith it worked perfectly and took the 'flex' out of the spindle so I could finish the project. Not hard to mount on a Shopsmith.
1 - 10
Back to top
©2014 by Woodcraft Supply LLC