Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
you will end up spending more...
Bottle Stopper Starter Set Turning Kit - Chrome
first of all, at the price that your paying you don't really get any special value. you are better off buying the stoppers, drill bit, and mandrel separate. the drill bit is to big to start off with. yes you can get by with the drill provided, you just have to glue the stud into the wood when you assemble it. The mandrel that came with mine sheared off inside the wood..my guess is just poor quality steel. it snapped under regular use on its second bottle stopper. Im going to try the Whiteside mandrel and hopefully i don't get the same result. So basically if you buy this package your pretty much buying 2 mandrels and 2 drill bits. save a few bucks and buy them separate.
No, I would not recommend this to a friend
Good idea poor product
Eagle Point, Or.
These could be very nice gifts but it will take a while to turn the threads on the mandrel down so the stopper threads will fit in snug. The drill bit is also too large but that was easily fixed by just using a smaller drill bit.
wrong size stud
The stopper itself is good looking and appears well made. The problem is the included studs are the wrong size. Too small for the threads in the stopper and the mandril. You can solve it by replacing the stud with a cut off 1/4" x 20 x 1 1/2" stainless bolt, but you shouldn't have to. I am waiting for Woodcraft to respond to my request for the proper size studs.
I use this product often
repitition and assembley is easey and rewarding
Yes, I would recommend this to a friend
Not what I expected
For a starter set it is a great value, however the drill bit supplied is too big and therefore the included mandrel stripped out in the hole. I compensated with a smaller drill bit and the problem seemed to go away. The threads in the stopper itself are very loose and a drop of glue or epoxy is needed to keep everything tight.
It was everything I needed
It was everything I needed to make some nice gifts
good start kit, but not complete.
Dean in Rohnert Park
Rohnert Park, Ca
A good starter kit for wine stoppers, but my kit did not come with O Rings. Looking at the web site and the package the kit comes in, it does not list the O rings as part of the kit. It would have been nice to see something said about the rings not part of the kit so I could have gotten them the same time I got the kit. So the stopper are usless right now until I can order the rings or head back up to the store and pick up some - if they have any there since I never seen them for sale at the store.
works well in building and in sealing
San Jose , CA
Mandrel works well in hardwood. If doing soft wood might consider a slightly smaller dia. drill.
I think the mandrel could be a bit smaller for the size of the stopper threads.
I would buy parts of this product again,
I am using this product as a way to continue to develop my skills and to make something of quality to give as gifts
1 - 10
Back to top
©2014 by Woodcraft Supply LLC