Heavy Duty Leg Levelers, Small Foot (4)

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

this was exactly the product i was searching for!

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

Real time saver installing cabinets over uneven concrete or tiled floors. Keeps cabinets off floors should water spill or a pipe leakes. You never know. You'll need a longer allen wrench then supplied. If you have cabinets without a removable toe kick you'll also need plastic plugs for holes drilled for access.

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

I built and out-feed table/storage unit for my table saw and needed something to make it the same height as my saw. I didn't want to spend a lot of money but wanted something that would support the weight of some tools. These fit my needs to a tee.

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

Definitely recommend to others

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

I bought these for an out-feed table that I built for my table saw. It has a torsion box top so it is very heavy. These levelers were able to match the height of the out-feed table to my saw without any problem at all. The other plus is that they were very reasonably priced.

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

This product is easy to install. You can't do it wrong. It is a little difficult to align the hex wrench to the leveler adjustment shaft when leveling, but no big deal. I have used these levelers before in my shop and they work very well for leveling my cabinets on an uneven cement floor.

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

my garage floor is so uneven that I was forced to use shim under my dead flat assembly table in order to keep it level. I wanted to use leveling feet but couldn't find any that would fit until I saw these. The only reason I had a hard time installing was because of how heavy my table is!! Once they are under and screwed in, the hex key makes it easy left or drop each corner. See the photo; scribing was not an option!

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

Catalog description lacks height measurement - if you're installing these on bookcases, your kickplate must be at least 2.5" tall. These are sufficiently "heavy duty" in design to hold a lot of weight, allow you to correct for an uneven floor, and move the case without floor damage. I'll be using these again on my next project.

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

The #5 hex wrench used for adjustment has to be cut down. The tail of the hex wrench is too long and hits the vertical support. Other than the fact this should have been tested the product itself is easy to install and is well made. Just be prepared to cut the hex wrench tail in half.

Comments about Heavy Duty Leg Levelers, Small Foot (4) :

The only improvement I might add would be to beef up the nut threads. But will work great for a mobile table saw base.