$500 Off NOVA 1624-44 Lathe
Whatever projects you turn, the Nova 1624-44 wood lathe will meet your needs for a lifetime.
Buy Now $899.99
Go Mobile w/Heavy-Duty Casters
Save 30% on Heavy-Duty Casters through April 25.
Shop Sizes & Styles
Buy Laguna 14-12 Bandsaw & Get a Free Industrial Flood Light
Perfect for serious woodworkers and hobbyists.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
I would buy this product again.
Drill Bit Stop Collars-7 Pc. Set
I can't get to hold on the countersink bits I bought(too thick)
Yes, I would recommend this to a friend
They Don't Work! Covered in Oil.
Tried using the 1/4" on a 1/4" brad point. No matter how tight I tightened the screw, it still slipped. At one point I thought I had it tight enough but it immediately slipped when I tried drilling the hole.
They are also soaked in some kind of oil, which is not good for woodworking.
I am disappointed that Woodcraft would sell something that works as poorly as this. They are DEFINITELY going back!!
No, I would not recommend this to a friend
Poor Quality but great idea
I used one of the drill bits. The screw broke the second time I secured it on the bit. It was so very difficult to tighten it the fist time I used it. It is a great idea but these do not work well. I can not recommend these drill bit stops to anyone!
very good fit
Fits my Craftsman band saw perfect. My bandsaw is 21 years old.And Woodcraft was the only company that had one te fit. Thank you
Too stiff? Didn't fit?
Los Angeles, CA
A lot of reviews complain about these being too stiff to use. Has anybody who had trouble getting one of these to clamp tightly tried grinding some material off the hinge side of the ring? With enough material removed, even the flimsiest set screw should clamp it tight.
Great product for a common problem
lot better for stopping drills at right length than a piece of tape wrapped around the drill bit.
Five of the pack of seven worked as designed. Two did not. Unfortunately those 2, 5/16 and 3/8 are the two I need most. No matter how hard I turn the set screw with the allen wrench they do not tighten. All I ended up with is a rounded off allen wrench.
Previously used blue tape for setting my bit depth but had lots of dowel holes to drill at exact depths. These stop collars fit and worked fine.
Not machined accurately and no give!
Unfortunately, the one collar that I really needed does not quite fit the bit (it's slightly too large for the bit, even though it's -supposed- to fit) and there's not enough give for it to work, so this set turned out to be a waste for me.
Most everyone has had good luck with these, but only some of the collars in the pack worked for me. I made sure I was using the correct collar for the 1/4" bit when I looked these over and found it wouldn't clamp on the bit no matter how hard I cranked the allen wrench. I even second guessed myself when it wouldn't clamp and checked again. I wanted these to replace the set screw type I've had for years but sent them back and asked for a return in the way of Gift Card.[...] Sometimes things just don't pan out like you'd want; I'm still using my old set.
1 - 10
Back to top
©2014 by Woodcraft Supply LLC