New Festool TS 55 REQ Plunge Cut Saw
Festool has made the best plunge saw better.
JET Benchtop Spindle Sander
Save $100 on this customer favorite!
Save $50 on HTC-3000 Mobile Base
Fully adjustable, holds up to 700 lbs.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 2
Back to top
Expensive but good.
FULLER Tapered Drills Boxed Set
Yes, I would recommend this to a friend
This is THE countersink set to buy.
I typically use #6, #8 and #10 screws for assembly of hardwood projects and these Fuller counterbore drills with the tapered bits have been my favorite for over 5 years now. I typically work with oak, maple and poplar.
The plug cutters work well also and take care of the problem of mis-matched wood when using plugs.
The nice wooden case keeps these all together in an easy-to-use manner and I wouldn't be without it. I really love the tapered bit (vs. a non-tapered bit) and it makes starting the hole in the exact spot you want it easy without any need for center-punching a starting hole. Also, the tapered bit keeps the hole small at the bottom so that you get a better match for tapered screws. Note that you might not want to use a tapered bit for MDF work if you are using full bore fasteners (MDF splits very easily).
My only complaint has been that the counterbore cutter tends to get dull and it isn't easily resharpened (new ones cost about ten dollars each).
1 - 2
Back to top
©2013 by Woodcraft Supply LLC