Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
Shipping / Billing Info:
of respondents would recommend this to a friend.
1 - 2
Back to top
Good machine for the money
Jet Benchtop Mortiser, Model JBM-5
For the [$] price tag, it's a good machine. For three times the price you can get the stationary powermatic and do much larger boards. But I don't have the room to spare for a mortiser so I went with this model. It's easy to assemble, comes well packaged with a set of 3 chisels and an adequate manual. The Jet has clean looks, fit and finish as well as a solid design. There's no wobble to the head which helps with consistent mortises. Setting the chisel square to the work piece is easy enough using the fence and your work piece. The manual explains how to do it. The hold down fork holds the workpiece while you extract the chisel. The long lever is more than sufficient for helping torque the chisel into woods like oak and maple. You will need to definitely bolt it down to a solid work surface due to the amount of torque needed to press and release the lever. Two things I would change about this machine:First - It needs to have some sort of height adjustment for taller boards that need mortises.Second - It needs a larger table. The Delta is $30 cheaper and has a table almost twice the size of the Jet and the Delta's table is cast iron. In conclusion, I rate the Jet Mortiser highly because it works like a charm every time. It's plenty powerful and it makes clean square holes every time. I'd definitely recommend it to a friend.
Yes, I would recommend this to a friend
Cedar Rapids, IA
Compared to other bench top mortising machines this one runs at 1750 rpm and the others run at 3500 rpm. That's the primary reason I bought this one. The hold down device is not adequate and must be supplemented with additional clamps.
1 - 2
Back to top
©2014 by Woodcraft Supply LLC