Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
Shipping / Billing Info:
of respondents would recommend this to a friend.
1 - 3
Back to top
Jet 13" Planer/Molder, Model JWPM-13CS
I use it to deminsion lumber, it has a problem with wide hard Maple.
I find it easy to change over to the molding mode, and back.
The moldings come out almost ready to stain. I have done several basements, base, crown, door caseings etc. never missed a beat.
I purchased it almost 4 years ago.
Yes, I would recommend this to a friend
I pruchased the enclosed version a year ago. I have run many board feet of hardwood through it (mostly cherry), and the finish is still great. I get minimal to no snipe after adjusting the roller extensions attached to the cast iron bed. Dust collection is excepdtional. A small amount of chips collect on the cast iron table when runing narrow boards through it, but my floor is clean. The enclosed base does prevent storage on a shelf but the built in mobile base makes moving it easy. Since I only use it when dimensioning lumber at the begining of a project I store it under my basement steps. Maybe not a good choice if you have a small shop.
Not your fathers Oldsmobile
The stationary unit comes with all the features but is not portable. In many shops to conserve space, portablility of the planer is a must. The unit sold with a portable base does not come with dust collector port or infeed/outfeed rollers and the rollers cannot be bought seperatly. Further, the knife adjustment is a circus, the knives go out of adjustment as you tighten the anchor screws. Overall, the life of the knives are quite short. I have a very old low budget portable that will out perform this unit.
No, I would not recommend this to a friend
1 - 3
Back to top
©2014 by Woodcraft Supply LLC