Sign Up Today and Get a Special 10% Off Coupon

Oneway Wolverine Platform

Item #834132
$29.99
Qty.   or Add to Wish List

 
4.5

(2 reviews)

Read Reviews | Write a Review


INFORMATION
REVIEWS

Product Information:

Wolverine Grinding Jig. Will save you time, frustration and money by allowing you to grind tools right the first time and every time. You'll create accurate cutting angles and straight edges in a fraction of the time it now takes and your tools will be easier and safer to work with!
  • The Wolverine system is furnished with two bases, one to mount under each wheel, which permit two simultaneous grinding set ups.
  • Each base accepts either sliding arm.
  • Arms are effortlessly adjusted or secured by a cam locking device.
  • The “V” arm attachment is 27" in length and is perfect for sharpening gouges, skews, chisels, or carving tools.
  • Just pull the arm out until the tool rests on the wheel at the proper angle and you're ready to start.
  • The 3" x 5" platform jig uses quick release ratchet handles for angle adjustments and is perfect for sharpening scrapers.
  • Wolverine comes complete with instructions for installation and use.
  • Turner's Fingernail/Side Grinding Jig. When turning coves, beads and other fine details, nothing beats a sharp fingernail profiled spindle gouge. For rapid internal hollowing or fast smooth external cuts on a bowl, nothing beats a side grind. However, because of the difficulty in producing these edges (both require rolling the tool edge and “swinging” the handle at the same time) most turners have never really enjoyed the benefits of a well ground gouge. Grinding difficult fingernail profiles on shallow spindle gouges and side grinds (also called Irish or long grinds) on deep fluted bowl gouges is quick and easy when you use the new Vari-Grind Fingernail/Side Grinding Jig. The Vari-Grind combines the “roll & swing” motion into one easily controlled movement that results in an edge so perfect you'll be amazed at how easily you formed it! We recommend using the Wolverine Grinding Jig, or any other “V” arm system, with the Wolverine for maximum control and perfect, repeatable fingernail and side grinds.

    Wolverine Skew Jig.
    Developed to be used with the Wolverine Grinding Jig, this accessory make sharpening skew tools a snap. Simply attach the skew jig to the Wolverine V-arm, lock in place and you're ready to go.

    Wolverine Platform Kit
    We’ve taken one of the Wolverine’s standard bases and platforms to create a kit for sharpening chisels and plane blades using an ordinary grinder. The base attaches to the bench underneath the grinder and features Wolverine’s system of adjustment so distance from base to the stone is easily set. If you would like to increase the versatility of your grinder this is one of the best accessories you can own. Some assembly required.

    Wolverine Dressing Attachment. Used with the Wolverine bases, this wheel dressing attachment removes glazing and produces clean, truly round wheels quickly and easily. The precise adjustment knob allows you to remove as little as .002" per pass over the grinding wheel. Not illustrated.

    Wolverine Vari-Grind 2
    Produce and maintain prefect fingernail, and side grind, profiles on spindle and bowl gouges. The new Vari-Grind 2 offers "side restrained action" to keep the tool safely centered on the wheel, eliminating the chance for slipping of the wheel's edge. Sharp, consistent profiles are easy because the tool rotates about the center of the adjusting rod allowing maximum flexibility, not only in matching a profile but also in creating your own. Available with or without the base.
    California Residents: Click here for Proposition 65 information.