Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 7
Back to top
Professional Pen Turning Mandrel 1 MT
Use this to make pens, pencil, and other small turned projects.
Yes, I would recommend this to a friend
this item is a must have
Tom The Turner
Nice mandrel for pens etc but it should come with at least 3 7mm bushings.
Should come with a wrench
Works very well
Very easy to use. I do think that it should of had a set of bushings with it but I would say it is worth the money.
Paul in VA
This works great. I bought this to use with my small wood lathe, which only accepts MT#1 attachments. Recently acquired an old metal lathe that I set up before setting up the wood lathe. Found a MT#3 to MT#1 adapter in the tooling I received (couldn't believe the luck!) with the metal lathe and tried to use this with the metal lathe (which has a MT#3 spindle). Found that this product did not work with the adapter. Looking at the problem, I had to shorten the MT (about 3/8") on this product to use in the adapter. Other than that minor problem (which is why I gave it 4 instead of 5 stars), this has worked great. Still works fine in the wood lathe, but if you buy this then upgrade to a larger lathe with a MT#2 in the spindle, beware that the adapters may not work unless you shorten the MT on this product. If you do have to shorten it be sure to debur the outside.
Just to be clear, I did try this product in my wood lathe before shortening it and it is fine because the spindle hole is open ended. This will only be an issue if you get a larger lathe and need to use a MT#2 to MT#1 adapter (MT#3 are not typically used on wood lathes).
Must have mandrel
A must have M/T when using different size mandrel's.
1 - 7
Back to top
©2014 by Woodcraft Supply LLC