Shop Now & Save 10% on Laguna Tools
October is the month to save on Laguna Power Tools at Woodcraft.
Shop & Save 10%
RIKON Benchtop Bandsaw Now $90 Off
This little beaut will fit in any shop!
Get Yours $199.99
Save $500 on Nova DVR XP Lathe
Don't miss your chance to save $500 on this "intelligent" lathe.
Now Only $1,899.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 6
Back to top
Apple Valley, Cal.
Soss Non-mortise Hinge for 3/4" Panels
We have used these before on the same product that is made once a year at this time.
Yes, I would recommend this to a friend
Nice clean look when installed
The hinges work great. Mounting hole diameter and placement is critical. It's difficult to find a Fostner bit or drill for 14mm hole.
Nice hinge for boxes
I have been building some wooden boxes lately and have been using these barrell hinges as another method of installing the lids. They work fine so far but they are finnicky to install and require a 14mm bit to drill the mounting hole. I bought a 14mm forstner bit and for some reason it is a different size 14mm than the 14mm plug cutter I have is. Is not all 14mm supposed to be the same size? Otherwise, I am satisfied with these Soss hinges and will continue to buy more as needed.
Images shared by
Made with Product, Picture of Product, Using Product
I found this hinge required hammering to install and had to be perfectly aligned on the first try because it was too tight to adjust. I used a 14 mm drill bit as suggested.
No, I would not recommend this to a friend
One of the greatest inventions ever!
Aaron Eugene Fleming
WA, CA, PA, FL
I have used these everywhere from yacht cabinetry, to wainscot in bars with secret tables, that folded out from some panels.
Don't forget to order 35/64" bit
The only problem is it requires the 14mm or 35/64" drill bit which they do mention but is difficult to find and a 1/2" drill bit won't do it.
1 - 6
Back to top
©2014 by Woodcraft Supply LLC