Save $40 on RIKON Slow-Speed Grinder
Keep your tools sharp and safe without edge destroying heat.
Buy Today & Save
$25 Off HTC Tool Table
You'll find hundreds of uses for this table in your shop.
Now Only $39.99
Six-Shelf Wood Rack Now $39.99
Safely and properly store wood with this customer favorite.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 6
Back to top
Good value center mount med. duty slide
Accuride 1029 15" Center Mount Drawer Slide Bright Chrome
The slide didn't seem very well lubricated from the factory. Made a graunching noise and didn't feel right. I used a small screwdriver to smear a thin film of moly-disulfide grease on the ball bearing tracks and now it slides in and out very smoothly. Instructions could use some improvement. They tell you to measure to the back mounting bracket up 13/16" from the cross rail, but they don't tell you what the cross rail is.
I think they mean the horizontal face frame member under the drawer. A labeled drawing would have helped a lot.
Yes, I would recommend this to a friend
Great for Small Dovetailed Drawers
These are 3/4 extension centermount slides. They can be used solo, with the small glides tacked in the frame. They can also be used in pairs, while still undermounted. For drawers wider than about 14", I use them in pairs. In that case, you don't have to use the glide tacks.
These are light duty - but that can be a good thing. I use them for desk drawers, and small drawers in entertainment centers. They are completely invisible from the side of the drawer - which is great for dovetails.
Images shared by
Accuride 1029 slides are invisible from the sides
Centermount, Made with Product
works with inset drawers
Made with Product
At the time of full extensions slides being a standard, this is a poor solution - even for a repair! Good quality - OK price - .I should have read the description with more ATTENTION.
No, I would not recommend this to a friend
Although this slide is light duty for small drawers, it only takes up a minimum amount depth from the drawer.
This is a center mount slide. It needs a hole in the very end to catch the back of the drawer.
Good product, worked as advertised
DIY in Va Beach
It is important that you measure your drawers correctly. Prices compared favorably with other websites I visited, but Woodcraft website provided the most detailed specifications/measurements, which is why I went with their product.
1 - 6
Back to top
©2014 by Woodcraft Supply LLC