Delta Left and Right Tilt Zero Clearance Insert

Comments about Delta Left and Right Tilt Zero Clearance Insert :

Perfect fit for my Craftsman Table saw Model 221240.

Comments about Delta Left and Right Tilt Zero Clearance Insert :

This is a quality product and I would recommend it to anyone. It fit the table very well and leveled up real easy with the adjustment screws.

Comments about Delta Left and Right Tilt Zero Clearance Insert :

Performs exactly as advertized. Fits very well. Snug fore and aft, side-to-side, and level with table. Perfect!

Comments about Delta Left and Right Tilt Zero Clearance Insert :

The best thing I thought was there is an adjustment screw to remove any slop both forward and sideways making the insert very snug. Also has 4 leveling screws. All these adjustment screws are already installed so all you have to do is raise the saw up through the plate. I will order them again when needed.

Comments about Delta Left and Right Tilt Zero Clearance Insert :

Excellent replacement

Comments about Delta Left and Right Tilt Zero Clearance Insert :

This ZCI works fine now. I called woodcraft to request a ZCI for my grizzly g1023 saw and this is the model I was given. Even after double checking with them that the grizzly wasn't listed as compatible I was assured it would fit. When I called woodcraft support all they offered was that it should fit with out modification and that I could probably return it if I wanted. I opted to break out a belt sander and take about 1/16" off all around to make it fit. Now it seems fine.

Comments about Delta Left and Right Tilt Zero Clearance Insert :

I currently use my table saw in making cabinet boxes. I need to change blades and set ups. I know I could have made my own zero clearance however, I find it to be time consuming and occassionaly frustrating to get proper thinkness. I have fabricated my own zero clearance insert for use with my dadoe saw.

Comments about Delta Left and Right Tilt Zero Clearance Insert :

The adjustment screws for the height, width and length of this insert make it very tight fitting. Also the weight of the phenolic eliminate any rattling around. I've bought several different brands of UMHW plates but none of them come even close to these phenolic ones

Comments about Delta Left and Right Tilt Zero Clearance Insert :

Used in an older model Delta Contractors saw. Once adjusted it fits great and does what it should. To make it work in my saw I had to expand the pre-grooved slots on the underside of the zero clearance insert so the 10" saw blade would clear during set up and initial start up. I used a burring tool in my Dremmel tool to do the job. Once making the appropriate groove deeper the rest of the set up was easy.

Comments about Delta Left and Right Tilt Zero Clearance Insert :

Works great , should package it in 2+ , most of us that use ZCIs need them for cross, rip & dado cuts, still a grear product