Ridgid R4512 Table Saw Zero-Clearance Blade Insert

Comments about Ridgid R4512 Table Saw Zero-Clearance Blade Insert :

This is the only zero clearance insert that I have been able to find that specifically fits the Ridgid R4512 table saw. Other reviews said the riving knife would not work with this insert, but it does. The set-up instructions were very good -I was not exactly sure how I was going to hold it in place while raising the blade. They suggested clamping a 2x4 across the entire table which seems so obvious now. I was concerned that there is nothing really holding it in place (except gravity). The instructions made it clear that they do not use the magnetic piece like the factory plate. This has not been a problem. I have had zero clearance plates on other table saws and they make a big difference in the quality of cut. So I'm glad I found this one and it works exactly as expected. Making my own was an option but the opening requires some pretty fancy routing/layout, etc. so this was a reasonably priced alternative that works!

Comments about Ridgid R4512 Table Saw Zero-Clearance Blade Insert :

Prevents small pieces of wood to get into the dust collector bag or hit the table saw user.

Comments about Ridgid R4512 Table Saw Zero-Clearance Blade Insert :

This insert greatly reduces chip-out, it should be included with the saw. Ridgid's design of the original table insert is in such a way where it's nearly impossible to make your own insert from MDF like many do with their other saws. The tablesaw's adjustment screws only allow about 3/16" space for the insert to rest upon, not giving a good amount of meat to grab onto. This commercial insert made by leecraft solves the problem.

Comments about Ridgid R4512 Table Saw Zero-Clearance Blade Insert :

Nice, rigid, well made insert. The surface is nice and slippery. Seems like it should last quite a while. The one I received was flat within .002". The only thing I would like to see is to have another adjustment screw in the front to make it a bit easier to tighten up the fit. However, even with just the one screw in the back, it can be adjusted for a snug enough fit.Highly recommended. I mean, come on, it's only about [$]. Well worth the money.

Comments about Ridgid R4512 Table Saw Zero-Clearance Blade Insert :

Great insert. Works with riving knife, no problem.

Comments about Ridgid R4512 Table Saw Zero-Clearance Blade Insert :

This zero-clearance blade insert has made ripping thin strips and using dado blades a lot safer.

Comments about Ridgid R4512 Table Saw Zero-Clearance Blade Insert :

Seems to work well. Unfortunatly the riving knife will not work with the insert as advertised, unless I am doing something wrong but the instructions are unclear as to doing anything other than what I have already done.

Comments about Ridgid R4512 Table Saw Zero-Clearance Blade Insert :

Well made insert that fits well. A little play side to side near the front of the insert but nothing major. All in all a worthy investment. Easy to install & use. A must have if you don't want or have time to build your own.