$50 Off WoodRiver® 3-Speed Air Cleaner
Set it on a workbench or hang it from the ceiling - this unit will clear the air.
Buy Now $249.99
Get the Right Angle w/Wixey Digital Angle Gauge
Save $10 on this popular workshop essential and always get the perfect angle.
On Sale $29.99
Save $30 On Freeman Mini Compressor
This little guy is great for airbrushes and delivers true "air-on-demand" - No constant running.
Buy Today Only $89.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 6
Back to top
Woodthreading Kit, 1" x 6 TPI
used to make jigs and adjusting supports for large food pantry
Yes, I would recommend this to a friend
Cut clean threads with ease
The threading die cuts beautiful threads with ease. I first used it to cut threads to secure the top on a pepper mill. Adding threads to a project improves functionality and makes it look professional and well-designed.
A very handy tool to have around.
I make canes and walking sticks.
Repair floor push brooms.
Not hard to use if you read up on how to.
Some hard wood dowels can break the cutting edge unless you read how to prepair the wood for cutting the threads. I own more than one/different size.
It could be better...
First I must say both the tap and die are well constructed. Unfortunately, the die needs one or two additional cutting teeth as even in hard wood it tends to rip and gouge, same to be said about the tap, which I find is to aggressive and useless.
No, I would not recommend this to a friend
Works real good
Wahpeton, North Dakota
I use the product to make wooden nuts & bolts
for a project that I was making.
Purchased this 3/4" kit yesterday, using walnut dowels I threaded 3 screws quite easily however on the third the threads looked crushed. Began to thread a cherry dowel today and it crushed the dowel - there were no threads. After removing the bottom plate and checking the cutter, which resembles a carving 'V' tool, the cutting edge was chipped. The edge had appearently been sharpened too thin whic makes it too brittle.
1 - 6
Back to top
©2014 by Woodcraft Supply LLC