Customer Service 1-800-225-1153 Product Support 1-800-535-4486
Please Note: This item can only be shipped ground to the 48 contiguous states. Some items cannot be shipped via air due to being flammable, magnetic, contains batteries, hazardous fumes or where contents are under pressure. Please use a physical address not a PO Box during checkout.
Freight items will be brought to the back of the delivery truck and it is your responsibility to unload. The driver will not help you. If you want delivery with a liftgate truck or wish to pick up the item yourself at the terminal, contact our Customer Service Dept. and they will work out the details and contact you with options.
(3 reviews)
Product Information:
California Residents: Click here for Proposition 65 information.
Articles:
We've Found These Items Related to: Rosewood Marking Gauge
REVIEW SNAPSHOT®
(based on 3 reviews)
33%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
Displaying reviews 1 - 3
Back to top
|
Wrong single pin location
By Dick
from Upstate NY
About Me Avid Do-It-Yourselfer
Comments about Rosewood Marking Gauge :
The single pin location was too far away from the registration block - smallest dimension possible would have been 7/8". Due to the mortise pins on reverse side, you could not move the registration block close enough to the single marker pin. I disassembled the unit and relocated the pin within 1/4" of the registration block and it is OK now.This is unacceptable!
Marking Gauge
By Gary
from Shelby, nc
Use to layout indexing on turnings
Adequate, but needed modification
from Upstate New York
About Me Professional
Single pin had to be relocated. As received, the closest it could be set to the shoulder was about 3/4" away. I relocated it for a minimum layout of 3/8". A good gauge should be able to get as close as 1/8"
©2012 by Woodcraft Supply LLC