Shop Now & Save 10% on Laguna Tools
October is the month to save on Laguna Power Tools at Woodcraft.
Shop & Save 10%
RIKON Benchtop Bandsaw Now $90 Off
This little beaut will fit in any shop!
Get Yours $199.99
Save $500 on Nova DVR XP Lathe
Don't miss your chance to save $500 on this "intelligent" lathe.
Now Only $1,899.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
waste of money
Economy Quick Release Front Vise
Dont waste your money on this. The quick release is useless. The vise come loose easily. Poor quality steel on the threaded rod.
No, I would not recommend this to a friend
very easy to install and an excellent value as a front and tail vice for shop built workbenches.
Yes, I would recommend this to a friend
This is an update from my January 2012 review. While doing some light testing after install, the cam snapped (just like an earlier review). I contacted Woodcraft, and since it was within the 90 guarnantee window, they sent me out a new cam the next day. Well, I took my bench apart to install the new cam and have been using the vise on and off for 5 months, being incredibly careful about clamping distribution and torque. Yesterday, the exact same piece snapped in the exact same spot. This is a major fault, and I would not buy this product until WoodRiver can re-design the cam mechanism. Woodcraft, however, has been very helpful through the whole process.
Good vive for the price
The Box Man
San Angelo, TX
Added it to my new work bench. So far no problems. Grips well. I am still getting the hang of the quick release mechanism but then I am a slow learner.
For those anoyed with the factory handle just go out and buy a 12" pipe nipple and two end caps. Works great @ half the price. Used the same handle in my Wood River end vice.
Wonderful, well worth the money.
I used four pieces of 3/4" fir ply for the jaw face, drilled required holes in plywood using forstner bits for snug fit, installed vise to bench using 1/4" lag screws. Have been using my vise for a month now with no problems, and no racking. The vise is installed on a 5 1/2" bench top with 9 1/2" tall plywood jaw that is 15 1/2"" wide.
Images shared by
Picture of Product
Good Vise... where are the instructions?
Vise is very sturdy and holds objects tightly, however, the vise does not come with mounting instructions, templates, or hardware. If I pay [$] for something, they should at least include the $.50 worth of mounting hardware and the fraction of a cent worth of mounting templates and instructions.
Made in China...broke on first real use.
Installed vise a year ago and used it intermittently since then. Just started to do some real work with it recently and on the first use, the quick-release cam mechanism snapped... iron collar just broke into two pieces.
Pressure applied at the time was significant and balanced, but not more than one would expect to hold a piece of wood firmly.
You get what you pay for... lesson learned.
Images shared by
Broken cam mechanism
The Good, The Bad and The Ugly
I've got two of them ... one as a side vice and one as an end vice. The instructions, although not written for 8th grade reading like Military Field Manuals, were just doable. The handle you guys sell is too small (like Dave O says, about 1.062"/27mm) I had some closet rod laying around and stuck it on the lathe and came up with 'The Right Stuff'. The hardware (i.e.:Screws) that are called for in the instructions aren't easily available but 1/4" lag bolts worked just fine ... I actually feel more comfortable with them. I did do some clean up on some of the rough casting, but when I was done I was convinced that it was as good as the $200+ ones they sell (It makes me feel better anyway!)
looks beefy; lacks directions
Have not used it yet but it appears to be well made and had good action
Nice Vice, Dowels are a poor fit.
Vise its self in nice.
The 1.000" dowel handle sold for this is a poor fit, too small. 1.125" is to large. Its probably 27mm or 1.062". Good luck finding that.
1 - 10
Back to top
©2014 by Woodcraft Supply LLC