Sign Up Today and Get a Special 10% Off Coupon

WOODPECKERS V2 Router Lift Included Router Table System With 24" x 32" MDF Top

Item #158864
$759.96
This Item is Currently Unavailable.
 
0.0

(No reviews)

Write a Review


INFORMATION

Product Information:

Woodpeckers® Model 420 V2 Router Lift combines instant elevation change with micro-adjustment to dramatically reduce the time it takes to change a router bit while allowing the user to “dial in” bit height for precision milling of stock. With a simple twist of the spring-assisted lift wrench, the router motor is free to be moved to any vertical location without requiring any other action. Fine, precise bit height changes are equally as effortless by “dialing” the thumb-wheel to make accurate adjustments.
  • Accurately machined carriage, with integral motor clamping mechanism fits industry standard PC 7518

  • CNC milled to exact tolerances for perfect fit in router tables with a 9-1/4" x 11-3/4" opening

  • Large 1.025" ground and polished steel posts and precision machined guide bearings

  • 3-9/16" bit opening accepts molded insert rings; includes 2-5/8", 1" and 1-3/16" guide bushing openings

  • Engraved scales to simplify fence positioning with 8 threaded setscrews for leveling

  • Includes spring-assisted lift wrench, threaded starting pin, spanner wrench and detailed instructions



  • Pinnacle® RF-3 Router Table Fence Heavy-wall triangle shaped aluminum extrusion of the fence body incorporates features normally reserved for more expensive router table fences.

  • Aluminum extruded fence body features integral dust collection with standard 2-1/4" dust port
  • Melamine coated MDF fence faces adjust for different bit diameters
  • 1/4? T-slot above fence faces for featherboards and other fence accessories
  • T-slots on the bottom of the fence body allow the fence to adapt to most router table tops
  • •Additional T-slots on the rear of the fence body allow the fence to adapt to most positioning jigs



  • Standard 27" wide x 20" front to back for typical router table tops measuring 32" x 24".


    Improved steel leg set for your router table top is adjustable in height to add a greater degree of comfort and control for most woodworkers. When choosing a size, keep in mind that your table should be at least 4” larger than the stand in both directions.
  • Constructed of heavy 14-gauge powder coated steel and made in the U.S.A.

  • Adjustable table height from 36" to 42" (345/8" to 405/8" without router table top)

  • Standard 27" x 20" size for typical router table tops measuring 32" x 24"

  • Larger 37" x 20" size for router tables tops 42" and wider

  • Features two separate braces to further support the center area of your table

  • Stands can be used with both center and offset style router table tops

  • Includes (4) adjustable non-skid levelers, assembly hardware and instructions



  • Building on the flatness advantages of MDF, the Woodpeckers Precision Router Table Top features a lower friction “Micro-Dot” laminate, bolted-in combination T-miter channel / T-track and two embedded fence tracks.
  • 1-3/8" thick top is laminated on both sides and machined in a CNC router to achieve tight tolerances

  • Micro-Dot laminate greatly reduces drag from sliding wood over the table top

  • Anodized aluminum combination T-Miter Channel / T-track bolted from underneath

  • Two embedded, anodized aluminum T-tracks for fence positioning are spaced on 17 centers

  • Table size is 23-1/2" x 31-1/2" with 9-1/4" x 11-3/4" router opening centered length wise and offset back approximately 13" from front

  • All outside edges are sealed with PVC edge banding
  • California Residents: Click here for Proposition 65 information.

    We've Found These Items Related to: WOODPECKERS V2 Router Lift Included Router Table System With 24" x 32" MDF Top