Black Friday Special!
This Freeman Combo features three guns and a compressor.
Limited Supplies! $169.99
Teknatool Products 15% Off
Now is the best time of the year to get your NOVA and Teknatool fix!
Shop & Save 15%
WoodRiver® 12" F Clamps now $3.99 each.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 3
Back to top
Nova Pen Jaws
Nova Pen Drilling Jaws
This does exactly what it is supposed to do - hold a pen blank securely so it can be drilled.
I find it to be much more accurate than my drill press using a pen vise clamped to my drill press table. Since I am now able to use my dust collector as I drill, there is considerably less mess.
The one thing it is not is faster. Where the drill press retracts automatically, the tailstock has to be manually advanced/retracted - not a big deal. Changing out the blank takes considerably longer (Lefty Tighty - Righty Loosy).
I have mine mounted on a dedicated chuck.
Everything considered, it is well worth the money, especially when using smaller blanks.
Yes, I would recommend this to a friend
This works great I put it on my chuck and drilled a practice hole and it came out right on center. I put a dowel in it and tightened down was no woble and it turned true. before I was using a nova pin jaw with 4 jaws and always had a hard time to drill a strait centered hole. I got this hoping it would be a little bit easier to drill the holes I needed to. I was wrong it worked way better then I was hopping for worth every penny and replaces my drill vise and drill press and my pin jaw. I was going to buy a really expensive pen vise but with this no need I am so happy with this. I even drilled a segmented piece 1/4 each side a different preice of wood this drilled it center 8 inches long no problems.
Does exactly what it's desgned to do.
As easy to install on a Nove 2 as any other jaws. Really grabs a pen blank and allow you to use a tail stock drill chuck to drill a centered hole through a pen blank. Since you are drilling along the lathe axis you are sure to get a perfectly centered hole for then mounting on your mandrel.
I have a pen drilling vise for my drill press, but this is faster, easier, less expensive and much more exact, not to mention less finicky, than using my drill press.
1 - 3
Back to top
©2014 by Woodcraft Supply LLC