Shop Now & Save $200 on RIKON Deluxe Bandsaw
This 14" deluxe beauty is perfect for any shop.
Buy Now for $799.99
Cool Retro Green Shop Stool $49.99
Take a load off with this chrome retro stool.
Shop & Save $20
Save $40 on RIKON Slow-Speed Grinder
Keep old tools sharp without edge destroying heat.
Now Only $99.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 4
Back to top
Tasmanian Blackwood 2-3/4" x 2-3/4" x 12"
Replacement for undersized materials sent. This is slightly oversized (very good!) and better quality wood.
Yes, I would recommend this to a friend
sized smaller than advertised
Bii the lathe guy
Needed full 3"x3" for type of mill I was turning
piece was 2-5/8 square, returned and second piece was also undersized. Gave up and cancelled. Had also purchased Olivewood. It was the right size but was quite wet.
No, I would not recommend this to a friend
Better than expected
This wood will make fine items turned on center. The bit of sapwood and mould staining will disappear when turned round. One piece with a couple of minor pin knots.
The 4 billets are replacements for undersized ones in original order. Dimensions are 3 1/16" - 3 3/16" square and slightly over 12" long. Rough sawn mostly and not a downside; waxed on both ends.
Don't judge item by the photograph
Advertized as 3" x 3". Is actually 2 3/4" x 2 3/4". I ordered 4 of these, one had a 2" knot right in the middle of the 12" length extending to one edge. This one item appears to be entirely sapwood. No wonder it's on sale . . . .
1 - 4
Back to top
©2014 by Woodcraft Supply LLC