Shop Now & Save 10% on Laguna Tools
October is the month to save on Laguna Power Tools at Woodcraft.
Shop & Save 10%
RIKON Benchtop Bandsaw Now $90 Off
This little beaut will fit in any shop!
Get Yours $199.99
Save $500 on Nova DVR XP Lathe
Don't miss your chance to save $500 on this "intelligent" lathe.
Now Only $1,899.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 8
Back to top
Works well for Woodcraft system componen
DWV PVC Pipe To 4-Inch Hose Dust Collection Adapter Fitting
It works well for most hose connections but doesn't fit all PVC pipe or machine dust ports. Costs add up if you require a lot of these connectors; so try to select dust collection hose, pipe and ports that do not require many of these.
Bad size description
I wanted to attach a flexible hose to a gate of a dustcollector. The hose side fits well, the gate side not, because it is exactly the same size as the gate. I wished the online description had exact measurements, ideally in cm for outer and inner diameters of this fitting.
No, I would not recommend this to a friend
Adapter for shop dust collection system
Good place to start. Adaptation necessary. Adapter does NOT fit snugly into any 4" PVC pipe product. Get out the duct tape and wrap to increase diameter for a snug fit. If you use PVC pipe for its smooth wall, you must consider how to eliminate static charge build up. Refer to JET book on dust collection.
Yes, I would recommend this to a friend
Exactly what I needed
Used this to connect flexible hose to PVC. Worked great.
Used in 4" thinwall pvc sewer/drain pipe
Needed to use silicone on adapter for a tight fit with the pipe.
Excellent, well designed fitting
Adapts nicely from 4"ID PVC to 4"hose. Connection at hose end could not be easier; simply screw the fitting into the hose. Connection at PVC end may require warming the PVC with a heat gun and massaging it to fit snugly, not too tight and not too loose. Other reviewers have criticized this product; in fact, I almost passed on ordering it. I bought 1 to see for myself, and I am reordering. This is a fine product.
Don't waste your money...
Don't waste your money! I bought 4 of these fittings, and within three weeks, they were all broken.
For a "compression" fitting, I expected the material to be more structually sound. When I attempted to push the fitting onto a collection port, the plastic exploded into multiple pieces. Same story with the others.
Completely unsatisfied with this purchase. Woodcraft should be ashamed for stocking this WORTHLESS item.
Don't buy this adapter!
Hilton Head Island, SC
This is a poor fitting adapter at the hard connection end. I just hope the ABS cement will fill in the space and compensate for the poor fit of the adapter!
1 - 8
Back to top
©2014 by Woodcraft Supply LLC