Shop Now & Save $200 on RIKON Deluxe Bandsaw
This 14" deluxe beauty is perfect for any shop.
Buy Now for $799.99
Cool Retro Green Shop Stool $49.99
Take a load off with this chrome retro stool.
Shop & Save $20
Save $40 on RIKON Slow-Speed Grinder
Keep old tools sharp without edge destroying heat.
Now Only $99.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 3
Back to top
Very Nice Product, Easy to install
Remote Digital Readout for Router Lifts
Installs in a reasonable time. Note: mounting screws are metric so they provide a drill bit and some self tapping screws. They do not state this in the instructions and I have heard of the screws breaking. I choose to use SAE screws and tap the holes.
Yes, I would recommend this to a friend
Saves Time, worth the dough!
Have a much older Jessem Lift. I had to make the Z bracket into an L bracket to install. Installation wasn't difficult and I didn't have any issues with the hardware. Photos gave a general idea on how to mount but could be better, even better if they included a couple styles of mounting brackets. Function is excellent, less than a 1/16" error in a full raise lower cycle, and who's going to do that in a production situation. A Full turn on the Jessem is 1/16, exactly what indicates on the display, thats where this is valuable small movements on items that require the detail.
San Antonio, TX
Installed on an older Jessem Router-Lift. No pictures available as to best place to mount. Used the included drill bit, oiled the self tapping screws and both broke before they were seated. Suggest you drill with a 5/32" bit, and tap the holes with a 10/24" tap.
1 - 3
Back to top
©2014 by Woodcraft Supply LLC