Black Friday Special!
This Freeman Combo features three guns and a compressor.
Limited Supplies! $169.99
Teknatool Products 15% Off
Now is the best time of the year to get your NOVA and Teknatool fix!
Shop & Save 15%
WoodRiver® 12" F Clamps now $3.99 each.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 6
Back to top
Works well w/swing away - move tailstock
nr. Ithaca, NY
20" Nova Bed Segment
I got tired of lifting the tailstock on my Nova lathe during bowl turning.
This plus the Bed Extension Swing-Away is expensive but certainly will save your back.
You can easily slide the tailstock out of the way after roughing the outside of a bowl.
Then easily slide the banjo out of the way during sanding and finishing of a bowl.
I did have to hone/lap the pieces to get the rails to the same height/width and remove burrs so the tailstock especially, and the banjo, would slide freely through the hinge onto the extension.
I don't know if I would go as far as the photo on the Nova web site of the NOVA Hybrid Half Stand Kit with two bed extensions and a large turning.
Yes, I would recommend this to a friend
Order was filled just as expected. The extension was easy to mount and lined up perfectly.
Great solid extension
Great extension for my 16-24 Nova lathe - now I can turn up to 45 to 46 inches depending if using the nova chuck or just drive centers. Very easy to attach and align by myself. Very accurately milled when checked with machinists straightedge.
This attached to my lathe without any problem. You cannot tell there are two pieces joined. The tail stock moves flawlessly from piece to piece without any hangups! Just follow the directions and you will have no problems.
20in NovaBed Segment
very poor fit to segment that comes with the lathe. Requires extensive filing.
This extension matches up well with the main bed but did have to do some filing and sanding to get the tailstock to slide freely. All the extensions I have added on different lathes have been the same way so guess this is normal. Works well and makes it easy to move the tailstock out of the way when it is not needed and when turning longer work. Worth the money to me!
1 - 6
Back to top
©2014 by Woodcraft Supply LLC