NOVA 1624-44 Lathe Save $500
One of our most popular lathes is on sale right now!
Buy Now $999.99
WoodRiver® Tenoning Jig $69.99
Cut perfect, straight and angled mitered tenons on your table saw.
Save $25 Today
Porter-Cable Belt Sander Save 15%
Small in size, light, and easy to use - perfect for most sanding jobs!
Now Only $93.49
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
WoodRiver Turners Collet Chuck Set #2 MT
Very useful for working with small diameter stock, easy setup and collet changes. I use it frequently with my Rikon. I would recomment getting a draw bar to use with it as it can vibrate loose.
Yes, I would recommend this to a friend
Nice tool to have
Use it to turn acrylic calls. Works great, no complaints
Works great / get one
Spokane Valley Wa.
This chuck works great with pin chuck manderals and shop made jam chucks. It was a little confusing using at first due to the way the collet seats in the chuck. It looks like the head that threads on over the chuck was made wrong and and the chuck collet does not fit correctly but is in fact designed so the collet slips into the screw on collar and sort of locks in to the collet and then you put it into the chuck body. Then once threaded on loose slip your pin chuck or work piece in and continue to tighten. I went to Woodcraft in Spokane after buying this chuck there thinking something was wrong the way the screw on collar was machined so we looked at another one and it was the same. Denny and Marc who work there assisted me and between us found on woodcrafts owners forum that this has been a misunderstood design and the threaded collar was machined to lock the collet loosely in first then insert into the chuck body. Well once I got the answer from Marc and Denny needless to say the chuck works great and I am very happy with it. Thanks Marc and Denny for the great customer service.
"I would buy this product again"
Yeah Boii Duck Calls
I use this to hold small dowling to prevent crushing the wood fibers.
I use this to hold mandrels for making musical instruments, The ability to hold round bars up to 5/8" with out having to buy a 5C collet chuck and machine a back plate for the wood lathe is a real plus. The tapered end is threaded to allow the use of a draw bar to keep the chuck tight in you headstock in case you are not using this tool in conjunction with your tailstock.
Collet Chuck Set
As demonstrated by Charles Niel. Great addition to a Lathe. But there does not seem to be a drawbar capability. It is essential that the chuck be fastened through the headstock for secure seating in the Lathe.... A chuck spinning out of the headstock can be very dangerous.
No, I would not recommend this to a friend
OK product but be careful in storing the
The collets are somewhat fragile and subsequently my 1/2" broke. Haven't been able to find a supplier for a replacement.
workes well but has limited use
It Is exactly what I need for my work of turning with dowells and small round turnings.
Nicely Made and Works Well.
Excellent for holding small diameter spindles. I have also used it to hold a small stand with a spigot on the bottom.
1 - 10
Back to top
©2015 by Woodcraft Supply LLC