Shop Now & Save $200 on RIKON Deluxe Bandsaw
This 14" deluxe beauty is perfect for any shop.
Buy Now for $799.99
Cool Retro Green Shop Stool $49.99
Take a load off with this chrome retro stool.
Shop & Save $20
Save $40 on RIKON Slow-Speed Grinder
Keep old tools sharp without edge destroying heat.
Now Only $99.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 4
Back to top
A quality product for the price
WoodRiver Small End Vise Slide
Comparing to the other reviews, I found that the fit of the slides had been fixed as well as the alignment of the screwholes. I agree with George, as it's an excellent size for my workbench also, which is 74 x 30. A cut sheet in the product description would be helpful, as well as a tentative drawing of the block structures to turn it into a completed tail/end vise in the shipped literature. However, we're woodworkers and should be able to figure that out.
Yes, I would recommend this to a friend
Pretty good value
Des Moines, IA
A little too much play in the slots that the plate slides along. It's not major, but could be refined. It leads to a minor bit of shiftiness in use. Could definitely use a more detailed cut sheet online and in the package to plan accordingly, plus to buy the right screws to accompany kit.
Serves its purpose
I'm building a heavy workbench from scratch and wanted to have a solid tail vise. This slide is the shorter of the 2 that I see offered by Woodcraft, and it's the perfect size for my workbench
It is, of course, made in China, but that is to be expected. My only complain is the the hole positions in the top and bottom plates are misaligned, and the manufacturer attempted to get around that flaw by forcing one of the bolts to conform, resulting in a bent bolt (unfortunately, the bend happens to be in the threaded part of the bolt). Luckily this did not hurt the threads in the top plate.
To make the plates align perfectly, I had to grind one of the holes (the unthreaded hole) wider by around 4mm. It works, but if you're not prepared to do this, I would suggest you look elsewhere. The bolts are metric, with fine thread, so replacements are not that easy to find in a local hardware store.
No, I would not recommend this to a friend
Easy to install - works great
Despatch, South Africa
I use it exclusively to fix boards on my bench for hand planing. Example dimensions on the product sheet would be nice
1 - 4
Back to top
©2014 by Woodcraft Supply LLC