Granite Surface Plate $10 Off
Super flat surface perfect for leveling plane blades.
Buy Now $26.99
Excalibur Scroll Saw Package
Geta great scroll saw with free stand and foot switch.
Right Now $899.99
JET Benchtop Spindle Saner $389.99
Take some of the chore out of sanding difficult pieces.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 4
Back to top
It's an OKAY track, but not super
Ft Scott, KS
Incra T-Track Plus, 48" Length
Its difficult to incorporate into a fence for a radial arm saw.
No, I would not recommend this to a friend
Makes a jig outstandingly useful!
The embedded tape measure is a time saving feature for my workbench/assembly table. The flange bolts slide easily bover the mounting screws. It was a great added featrure to include the mounting screws. A quality product.
Yes, I would recommend this to a friend
Perfect for my purpose
The existing tall fence on my add-on drill press table was interferring with the laser centers. I bought this track and a pair of tracklocks to replace that fence. It works beautifully. Gives a positive fence stop for the workpiece that is short enough to not interfere with the laser centers or the presses handles.
I added a couple of flip stops to use as stops along this track and have the perfect drill press fence. Functional, but unobtrusive. I will probably purchase an additional shorter length for those time I don't need the full 4' length fence.
Adding t-track rails
I was building add-on extensions form my miter saw -- the rules on the t-track would not allow me to "begin" their measurement at a different figure than 0. I could have cut-off the forst 9 or so inches, but I would not have the 9 inches for measurement (on stop blocks) at the far end.
1 - 4
Back to top
©2015 by Woodcraft Supply LLC