Shop Now & Save $200 on RIKON Deluxe Bandsaw
This 14" deluxe beauty is perfect for any shop.
Buy Now for $799.99
Cool Retro Green Shop Stool $49.99
Take a load off with this chrome retro stool.
Shop & Save $20
Save $40 on RIKON Slow-Speed Grinder
Keep old tools sharp without edge destroying heat.
Now Only $99.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 10
Back to top
Does this fit delta 36-725?
Delta Left and Right Tilt Zero Clearance Insert
Curious if this fits the model sold at lowes
can't say enough about these throut boards
Yes, I would recommend this to a friend
Elizabeth City, NC
Perfect fit for my Craftsman Table saw Model 221240.
This is a quality product and I would recommend it to anyone. It fit the table very well and leveled up real easy with the adjustment screws.
Performs exactly as advertized. Fits very well. Snug fore and aft, side-to-side, and level with table. Perfect!
The best thing I thought was there is an adjustment screw to remove any slop both forward and sideways making the insert very snug. Also has 4 leveling screws. All these adjustment screws are already installed so all you have to do is raise the saw up through the plate. I will order them again when needed.
EXCELLENT REPLACEMENT - EASY TO USE
ZCI works fine with woodcraft support is
This ZCI works fine now. I called woodcraft to request a ZCI for my grizzly g1023 saw and this is the model I was given. Even after double checking with them that the grizzly wasn't listed as compatible I was assured it would fit.
When I called woodcraft support all they offered was that it should fit with out modification and that I could probably return it if I wanted.
I opted to break out a belt sander and take about 1/16" off all around to make it fit. Now it seems fine.
Lower Nuese Craven County NC
I currently use my table saw in making cabinet boxes. I need to change blades and set ups. I know I could have made my own zero clearance however, I find it to be time consuming and occassionaly frustrating to get proper thinkness. I have fabricated my own zero clearance insert for use with my dadoe saw.
tight fitting insert
The adjustment screws for the height, width and length of this insert make it very tight fitting. Also the weight of the phenolic eliminate any rattling around. I've bought several different brands of UMHW plates but none of them come even close to these phenolic ones
1 - 10
Back to top
©2014 by Woodcraft Supply LLC