Granite Surface Plate $10 Off
Super flat surface perfect for leveling plane blades.
Buy Now $26.99
Excalibur Scroll Saw Package
Geta great scroll saw with free stand and foot switch.
Right Now $899.99
JET Benchtop Spindle Saner $389.99
Take some of the chore out of sanding difficult pieces.
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 4
Back to top
Not for me
T" Wrench for 10-24 Inserts
It looks good, but in practice I found that the inserts don't readily dislodge from the tool. I found it much easier to use a hex wrench on the inserts I am using. It does hold down papers nicely.
No, I would not recommend this to a friend
Yes, I would recommend this to a friend
This tool broke
This tool broke while installing in birch plywood. The threads broke off into the threaded insert. I had to use a Dremel to get it out. And no, excessive force was not used.
Tool fails on third insertion
Ann Arbor, MI
The insertion tool for 10-24 nuts is too soft to allow nuts to be inserted into hardwood of any kind. The screw on the t-handle twisted off on the third insertion. The nuts go into 1/2 "diameter holes but in oak they need to be either 1/64 bigger or you need a tool that is heat treated. On the remaining holes which were 1/2" dia. I used a hex head cap screw (which is heat treated)and nut to insert the rest of the nuts.
The tool for the 1/4-20 nuts is larger in diameter so it was able to insert nuts properly into Oak. I would recommend using the hex cap screw and nut for all of this type of nut.
1 - 4
Back to top
©2015 by Woodcraft Supply LLC