RIKON Benchtop Bandsaw Now $229.99
Add a great bandsaw to even the smallest shop!
Buy Now & Save $60
New SawStop Jobsite Saw!
Get the safety of a SawStop wherever the job takes you.
HTC-2000 Mobile Base Now $49.99
Put your shop on wheels!
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 6
Back to top
When you need it . . .
Rabbet Plane, No. 93
I purchased this plane to assist with a project that required fitting 32 tenons into mortises. I had Woodcraft to sharpen the blade to save me time when it arrived. They did a great job. The tool looks and works great. Although it is very much a specialty tool, I would not want to be without it for future projects requiring fitting tenons to mortises. I have also found a few other uses and am sure that over time, I will find more. I would purchase it again without hesitation. If you have several projects requiring fitting tenons, I recommend you give this tool consideration and a place in your tool collection.
Yes, I would recommend this to a friend
Waste of time and money
Rapid City, SD
The sole and sides are not square. The slot in the blade adjustment screw was poorly machined and is nearly impossible to tighten. I wish I had researched this plane before purchasing, turns out people have been complaining about the same poor workmanship as far back as 2004 and Stanley continues to make the same mistakes. Do not assume that for exorbitant price you are buying a quality tool.
No, I would not recommend this to a friend
I sent it back!
Monroe Township, NJ
Stanly usually makes very fine tools but this one must have been over looked by quality control as the threads on the blade adjustment screw were dinged and it looked to be slightly bent make blade adjustment difficult. I am a retired tool maker for Ford Motor Co. 30 years so I know what I am talking about. I didn't want to take a chance on just replacing it.
Salt Lake City
The plane iron is of such low quality that it does not take an edge.
I needed something to clean and fit some fairly long tenons. After a brief blade touch-up, this plane did a great job. They didn't have the 92 in stock, so I bought the 93. I'm very glad that I did, and believe that the 92 would be too small in my hand for this particular task.
I would buy this plane again
Millington, Tennessee 38053
First, your staff are all very professional and courteous. I haven't checked out any of the other places on like because I like Woodcraft better.
The plane handles well and has a good feel and weight. Unlike some other planes that I've used in the past it cuts well. Some chatter but not bad. The weight of the body is good and prevents wandering on difficult surfaces such as over knots and twists in the wood. I would buy one again if needed. It wasn't the one that I wanted but I am pleased with it anyway. The one that I wanted was out of stock and I needed it as soon as possible. Thank you.
PS: I need a new catalog. My catalog dates to January 09. Thanks
1 - 6
Back to top
©2015 by Woodcraft Supply LLC