Lumber Rack Set

Comments about Lumber Rack Set :

This rack does the job of storing heavy lumber. It has a raw industrial finish and considering the price might disappoint.I put on a coat of paint and call it satisfacatory.

Comments about Lumber Rack Set :

I purchased 8 sets of straps (55" and 24") and 60+ brackets so my investment was quite high. In order for your hardwood to stay flat, care must be given to make sure each bracket is nested correctly into each strap. The poor craftsmanship of the manufacture makes this very difficult. I ran a string line for the top row with success, however each additional row was off as much as 5/16". I used a mallet to hit each bracket down to seat, but again the poor galvanizing made this almost impossible. I ended up filing each bracket until it fit. I would purchase again, only because I cannot find anything better, but that doesn't make this product great.

Comments about Lumber Rack Set :

My problem was that there was no storage shelving system that would carry the load. I wanted to fill the wall of my shed (I use it for a woodworking shop) with oak boards. Dried Oak weighs about 3.2 lbs./bdft. Assume 16' length, average width over 12" and stacked 7 feet high. The total weight is over 2 tons, about 4,500 lbs. The wall of my shed is made of 2 x 4 studs on 16" centers. I wasn't sure if the wall would take the load. So, I reinforced it by attached 2 x 3's flat onto each 2 x 4 using 4" deck screws. Two screws every 8 inches. To these, I mounted a 55" and a 24" strap to cover the height I wanted. These straps were applied to every other stud such that the separation between supports was 32". Note well; the original system I bought had drilled and counter sunk holes for #10 screws - two every 6". (apparently they discontinued this practice which I learned when I bought my second system.) Therefore, on my second system I had to drill and counter-sink those holes myself. For extreme loading I believe this mounting is critical (in addition to the 5/16" x 4.5" lag bolts used at either end of each strap.) I used #10 x 2.5" flat head metal screws in the two holes drilled and countersunk every six inches to mount the straps (in addition to the lag bolts). When I first opened the shipment and saw the components of this racking system, I was both thrilled and concerned as I knew that to take full advantage of this super heavy duty system, I should reinforce the wall. Having done that, I loaded the rack with oak boards. We're talking between 4,000 and 5,000 lbs of lumber. ...not even a whimper. This racking system is magnificent if you want it to carry very heavy loads. It does. My first system I've had for about 5 years. No sign of rust or corrosion of any kind. I just installed my second system this past winter. You might think that this shelving / rack system is expensive - not for what your getting. If you want a very solid heavy duty system - this is it. Just be sure you use adequate fastening proportional to the load you expect it to carry. And, of course, make sure the wall will take the load. My only complaint is that they discontinued supplying the "straps" with the pre-drilled and countersunk holes for #10 flathead scress. Very disappointing. Nevertheless, if you are handy enough, you can do this yourself. Make sure you use one of those multi-fluted high quality counter sink bits. A drill press here is almost a necessity. I wish they would return to supplying the uprights (straps) pre-drilled and countersunk every 6".

Comments about Lumber Rack Set :

This shelf system is adjustable and takes the loads.. very nice system!

Comments about Lumber Rack Set :

I reduced by half the floor area tied up with lumber storage in my shop. As I use up materials, I hope to get it down to what is on the rack. This rack is as solid as the wall you lag it to.

Comments about Lumber Rack Set :

Ive been looking at cantelever racks and other storage racks, but this one caught my eye. The simple installation using lag screws took minutes to secure all the standards to the studs in the wall.Clip on the heavy duty brackets and its ready to use. And heavy duty is what this rack/storage system is all about. Its perfect for any home or professional shop. Can be expanded to fit anyone's needs.