Buy Shinwa 421 S095 Japanese Kugihiki Flush Cutting Hand Saw at Woodcraft
Video
Zoom In

Shinwa 421/S09.5 Japanese "Kugihiki" Flush Cutting Hand Saw

Item #12F24
$31.99
Qty.  
 
or Add to Wish List


 
 
4.0

(4 reviews)

Read 4 Reviews | Write a Review


Pin It

Product Information:

This saw allows the cutting of dowels, pegs, through tenons and excess trim without marring the surrounding surface. How? The teeth on this special tool have no set, so the blade can cut right at the surface without disfiguring it. Its flexibility also permits access to tight spots, and it is a great knuckle saver too. Blade has a 5-3/4" cutting edge and 22 TPI.
”

  • Cuts dowels, pegs, through tenons, and excess trim
  • Does not mar surrounding surface
  • Flexibility permits access to tight spots
  • Blade has a 5-3/4" cutting edge
  • 22 TPI



    		•
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.0

    (based on 4 reviews)

    75%

    of respondents would recommend this to a friend.

    Pros

    • Easy to use (2)

    Cons

    Best Uses

    • Reviewer Profile:
    • Avid do-it-yourselfer (3)

    Displaying reviews 1 - 4

    Back to top

    |

    9/17/2011
     
    5.0

    quick, clean, and easy

    By  pahoehoe

    from San Antonio, TX

    About Me

    Pros

    • Works Effectively

    Cons

    Best Uses

    Comments about Shinwa 421/S09.5 Japanese "Kugihiki" Flush Cutting Hand Saw :

    The description is accurate. The cut is quick, clean, and easy. The best part is how well the design fits the purpose.

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    12/23/2010
     
    2.0

    Could be better

    By  Wood Chuck Woods

    from Anchorage, Ak

    About Me Avid Do-It-Yourselfer

    Verified Reviewer

    Pros

    • Lightweight

    Cons

    • Flimsy Construction
    • Not Effective

    Best Uses

    • Small Projects

    Comments about Shinwa 421/S09.5 Japanese "Kugihiki" Flush Cutting Hand Saw :

    It was a great saw when I had to only cut a couple of small dowls. But after trying a hundred or so it just does not cut to well I spend a lot of time trying to find the sweet spot or the blade sticks, there has to be a better saw out there and I'll find it

    • Primary Use:
    • Personal

    Bottom Line No, I would not recommend this to a friend

    Please let us know what kind of issue this is:

    3/2/2010
     
    4.0

    Arrives in questionable state

    By  blewcrowe

    from Bridgeton, NJ

    About Me Avid Do-It-Yourselfer

    Verified Buyer

    Pros

    • Easy To Use
    • Fast Action
    • Good Design
    • Great Blade

    Cons

    • Arrive with damaged blade
    • Cuts into finger easily

    Best Uses

    • In The Workshop
    • On dowels small pieces

    Comments about Shinwa 421/S09.5 Japanese "Kugihiki" Flush Cutting Hand Saw :

    Bought numerous over years. Often arrive with imperfect (less than flat) blades. Otherwise, cheap, fast cutting, irreplaceable, but very sharp: watch end of cut because blade will finish and quickly advance on to a nearby palm or finger.

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    12/1/2009
     
    5.0

    Great tool

    By  JP

    from Vermont

    About Me Avid Do-It-Yourselfer

    Verified Buyer

    Pros

    • Easy To Use

    Cons

    Best Uses

    • In The Field

    Comments about Shinwa 421/S09.5 Japanese "Kugihiki" Flush Cutting Hand Saw :

    None

    Bottom Line Yes, I would recommend this to a friend

    Please let us know what kind of issue this is:

    Displaying reviews 1 - 4

    Back to top

    |