Couple this basic airbrush with a compressor or “canned gas,” and you have everything you need to start spraying. While this kit is great for small projects and turnings, it is especially useful when using waterborne finishes like General’s Wood Turners Finish. Although this airbrush has an operating range from 15 PSI to 50 PSI, normal procedure is to start at 30 PSI and adjust up or down, depending on the material being sprayed. Kit contains a basic single action, siphon fed airbrush with a 3/4 oz. jar, 5' air hose, 1/4" coupler and a Propel regulator for using canned gas. Propel canned gas, sold separately below, is a propellant used with airbrushes when a compressor is not available. Requires a regulator cap.
California Residents: Click here for Proposition 65 information.