Avoid the hassles of creative clamping while trying to secure jigs on a work table. Magswitch gives you flexibility to mount anywhere on a steel surface, such as your table saw, jointer, shaper, band saw, drill press, or stationary sander.
- Each Mag-Jig is constructed to fit perfectly in a 3/4" board so the bottom of the magnet is flush to the table surface; using 2 or more Mag-Jigs on a fixture is ideal.
- Simply determine a mounting hole location in your jig fixture that ensures complete contact between the Mag-Jig and the steel table surface, drill a 30mm hole for each 20mm Mag-Jig using a forstner bit (40mm hole for 30mm Mag-Jig) and drop in the Mag-Jig.
- Two screw holes are provided on each unit in case you desire to more securely mount the Mag-Jig to your jig fixture.
- Using your jig fixture couldn't be any simpler: place the Mag-Jig against the work surface and turn the knob 185° in a clockwise direction to engage the Magswitch; when you're finished, turn the knob in a counter clockwise direction to disengage.
- Two or more Mag-Jigs per fixture are recommended.
California Residents: Click
here for Proposition 65 information.